Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Removing Film from Film Holder?

  1. #1

    Join Date
    Jan 2011
    Location
    Edmonton, Alberta, Canada
    Posts
    304

    Removing Film from Film Holder?

    I seem to be having trouble. Difficult to lift the leading edge of the film off the flat holder surface and trying not to damage the film. Not every time but quite frequent. Any simple how-to's?.

  2. #2
    Daniel Stone's Avatar
    Join Date
    Nov 2009
    Location
    Los Angeles area
    Posts
    2,157

    Re: Removing Film from Film Holder?

    right hand index-finger's fingernail under the edge of film, lift up

    right hand thumb, close down on very edge of film.

    Pull film out as straight as possible to minimize scratching sides of negative on metal parts on sides of holder, meanwhile LEFT hand holding down light trap(flappy part on end of holder) while removing film and transferring to hanger/reel/tray/box,etc...

    ***wash hands and dry thoroughly before handling any films(processed or unprocessed). Oils can translate into marks on your processed negatives***

    I'm somewhat ham-fisted, and I can make this work, even on 4x5, which has tiny margins on the negative vs 8x10 film

    -Dan

  3. #3
    Octogenarian
    Join Date
    Sep 2003
    Location
    Frisco, Texas
    Posts
    3,532

    Re: Removing Film from Film Holder?

    If you are using a standard plastic film holder, such as a Fidelity, Lisco. etc., look for a round indentation in the plastic under the edge of the bottom flap.

    The indentation allows a finger nail to be slid under the sheet of film. Handle film, with clean hands, by the notched corner.

  4. #4

    Join Date
    Mar 2005
    Location
    Aurora, Colorado
    Posts
    526

    Re: Removing Film from Film Holder?

    I find standing the holder on its side makes it easier for me to get my finger nail under the film.
    Never is always wrong; always is never right.

    www.LostManPhoto.com
    www.MarkStahlkePhotography.com

  5. #5
    Peter
    Join Date
    Apr 2007
    Location
    Morro Bay, Ca
    Posts
    727

    Re: Removing Film from Film Holder?

    I blow a puff of air toward the film which always makes the film lift off the flat surface.
    I make sure my mouth is dry before I blow. It doesn't take much, the air just wants to get under the film and lift it up.

    Peter

  6. #6

    Join Date
    Nov 2008
    Location
    NW New Mexico
    Posts
    428

    Re: Removing Film from Film Holder?

    Holding them upside down....works for me...most of the time...

    If that doesn't work (like on some of my old stubborn holders)....use two hands, lay holder flat, push with your fingernail lightly against the center bottom edge (not on film surface), and one of the sides will rise enough for your other nail to grab it...

    Cheers,
    Dan
    Last edited by DanK; 4-Aug-2011 at 20:39. Reason: clarify

  7. #7

    Join Date
    Nov 2008
    Location
    NW New Mexico
    Posts
    428

    Re: Removing Film from Film Holder?

    Quote Originally Posted by Gem Singer View Post
    Handle film, with clean hands, by the notched corner.
    Gem,

    Curious as to the reasoning behind handling the film by the notched corner, makes sense, just hadn't seen it before.

    Thanks,
    Dan

  8. #8
    Octogenarian
    Join Date
    Sep 2003
    Location
    Frisco, Texas
    Posts
    3,532

    Re: Removing Film from Film Holder?

    Hi Dan,

    Merely force of habit from handling sheet film for many years.

    The notched corner is easy to handle without getting finger prints on the image area, and that way, I always know where the emulsion side is located.

  9. #9

    Join Date
    Jul 2007
    Location
    near Seattle, WA
    Posts
    957

    Re: Removing Film from Film Holder?

    If your fingernails are all chewed off and useless, then you may have other unrelated issues to deal with as well.

  10. #10

    Join Date
    Nov 2008
    Location
    NW New Mexico
    Posts
    428

    Re: Removing Film from Film Holder?

    Thanks Gem

    Dan

Similar Threads

  1. Film Holder T-depth and ANSI Standard
    By Mike Castles in forum Cameras & Camera Accessories
    Replies: 8
    Last Post: 11-Dec-2021, 19:44
  2. Polaroid Land Film Holder #500
    By Russell Graves in forum Cameras & Camera Accessories
    Replies: 9
    Last Post: 12-Aug-2008, 07:33
  3. Polaroid 545 film holder jamming up....
    By Sitron in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 24-Jan-2006, 21:08
  4. Multi Sheet Film Loader + Film Holder
    By Jon Miller in forum Cameras & Camera Accessories
    Replies: 4
    Last Post: 29-Jul-2000, 21:51

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •