Does anyone have the schematics for the Durst est 1000N power supply ? I am trying to fix mine. So that will be a great help.
Does anyone have the schematics for the Durst est 1000N power supply ? I am trying to fix mine. So that will be a great help.
I had undertaken literally hundreds of major electrical projects over the last 40 years before I got my broken Durst. In fact I got a soldering iron for Christmas when I was seven years old. Gary Mulder is also quite well versed in electronics.
If you have 'no clue' with electricity it might be best to find someone that can look at if for you.
Julia
Mains/line voltage electricity is not something to treat lightly. If you do not have a clue with electrical stuff, as ic-racer said, I highly recommend that you find someone else who does. Dealing with mains/line voltage is potentially fatal if you make a mistake. I have seen some "repairs" that were done so poorly that someone could easily be seriously injured or a fire started.
hello guys,
I just got a Durst 1840 and power supply EST 1000N , it was ok some time ago but there is a problem now
When I put it on "on" and start a timer to expose paper, the "shutter" on the head opens and closes non stop...
I think it could be a relay flickering...
-I tried several timers, same result
-tried different current socket in the building, no change
-electronic on the enlarger itself seems pretty simple so it could be on the power supply.
-the fan starts but seems to have some difficulties and acts as a stepping motor 'kind of"
-light is ok
excuse me if I'm not very precise, I'm french, I hope you understand the problem
any clue/advice?
Hello,
help me too with a copy of schematics for DURST EST 1000. The lamp does not light up!
Thanks
macmicus@gmail.com
When the EST1000N stabilizer is turned on, the scale backlight on the color head CLS1000 is working. When the timer starts, the shutter is released, but the 120v / 1000W lamp does not light up and the fan does not start.
The lamp is new, serviceable. All fuses on the stabilizer and CLS1000 are intact. A friend promised to help, but he needed a scheme of this stabilizer.
This scheme has been posted in the thread
https://www.largeformatphotography.i...ipment-problem
but it is of very poor quality.
Does anyone have a higher quality scan of this scheme? Work breaks due to breakdown)))
Last edited by macmicus; 9-Mar-2019 at 04:03. Reason: new info
Bookmarks