Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: cooling water bath

  1. #1

    Join Date
    Jun 2010
    Location
    Rhode Island
    Posts
    17

    cooling water bath

    does anyone know of a under 200.00 water bath that can acutally cool the water down to 70 degrees? I need one to hold a 64 ounce bottle of developer

    thanks in advance

    brian

  2. #2
    Peter De Smidt's Avatar
    Join Date
    Jan 2001
    Location
    Fond du Lac, WI, USA
    Posts
    8,978

    Re: cooling water bath

    You could adapt a used aquarium chiller. Try checking out craigslist. New one's will be more than $200, I expect. Check out Marinedepot.com .
    “You often feel tired, not because you've done too much, but because you've done too little of what sparks a light in you.”
    ― Alexander Den Heijer, Nothing You Don't Already Know

  3. #3
    Octogenarian
    Join Date
    Sep 2003
    Location
    Frisco, Texas
    Posts
    3,532

    Re: cooling water bath

    Use crushed ice or ice cubes in a plastic bag to cool down liquids in trays.

    Place a one gallon container of filtered (or distilled) water in the refrigerator over night, and use that water to make up developer and stop.

    A bottle of fixer will cool down to 70 degrees after about an hour in the frig.

    Wash water is running water from the cold water tap, which can be 84-86 degrees here in Texas during the summer months.

    No problem as long as the film is fixed and the temp. doesn't exceed 86 degrees.

  4. #4

    Join Date
    Jun 2010
    Location
    Rhode Island
    Posts
    17

    Re: cooling water bath

    Quote Originally Posted by Peter J. De Smidt View Post
    You could adapt a used aquarium chiller. Try checking out craigslist. New one's will be more than $200, I expect. Check out Marinedepot.com .
    Awesome thank you ---

  5. #5

    Join Date
    Dec 2009
    Location
    Pacifica, CA
    Posts
    1,710

    Re: cooling water bath

    Hey Brian,

    Good luck it'd be great to know if you find a real chiller. I added an extra hose between the faucet and sink, coiled it up and tied it with zip ties. In the summer, when I want 68* I put the coil in an ice chest with water and a bag of ice. At a reasonable low flow rate I can cool tap water (or tap water with a little hot) to 68*. I suppose a copper coil would do better.

    Bill

  6. #6

    Join Date
    Jun 2010
    Location
    Rhode Island
    Posts
    17

    Re: cooling water bath

    I found this, you can insert into a plastic tube (size of choice) and it will hold it at 70 degrees but I think 25 minutes in the fridge will save me the bling LOL

    http://www.marinedepot.com/CoolWorks...FICHMC-vi.html

  7. #7

    Join Date
    Dec 2008
    Location
    Sai Kung, Hong Kong
    Posts
    89

    Re: cooling water bath

    You need to be careful cooling large bodies of water in your fridge/freezer, it can seriously affect the temperature in there and shorten the lifespan of frozen foods. My manufacturer recommends putting my freezer on deep freeze for min 6 hours before adding large things to the fridge or freezer compartment.

    I use a cheaper aquarium cooler and large polystyrene packing box, free from our local greengrocer. It takes about 4-6 hours to reach 21'C but it works. It's 38'C here at the moment!

    We also use it to chill beers and white wine when we have a barbeque!

  8. #8

    Re: cooling water bath

    also you can DIY a chiller using a cheap dorm room size refridgerator. Depending on the model you can easily drill a hole into the side or top and run a coil of PVC pipe/tubes that are held inside of a bucket of water. Then you can run a cheap water pump that they sell for garden ponds to keep the water circulating around.

    I know of many people who have done just that for their Reef Aquariums

  9. #9
    ki6mf's Avatar
    Join Date
    Nov 2007
    Location
    Austin, TX
    Posts
    593

    Re: cooling water bath

    1. Get plastic water/soda bottles.
    2. Freeze them.
    3. Place in water to cool to desired temperature.
    4. Place in chemicals to cool to desired temperature.
    5. Wash off bottles before and after use to avoid contamination.
    6, Re freeze bottles for the next time.
    Use with conventional trays
    Wally Brooks

    Everything is Analog!
    Any Fool Can Shoot Digital!
    Any Coward can shoot a zoom! Use primes and get closer.

  10. #10

    Join Date
    Apr 2006
    Location
    Hell's Kitchen, New York
    Posts
    525

    Re: cooling water bath

    If you have a heated tempering bath you can use that - set it to 70 and then cool with frozen gel packs, not ice cubes which can lead to temperature fluctuations if they melt too fast and hence absorb heat faster than the tempering bath heater can supply it.

Similar Threads

  1. New Azo, M&P Amidol, and water bath
    By Jim Rice in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 6-Feb-2008, 03:53
  2. Old Formulas: Paper
    By Paul Fitzgerald in forum Darkroom: Film, Processing & Printing
    Replies: 12
    Last Post: 20-Oct-2006, 00:48
  3. Old Formulas : Toners
    By Paul Fitzgerald in forum Darkroom: Film, Processing & Printing
    Replies: 1
    Last Post: 2-Apr-2005, 09:35
  4. Old Formulas : Film
    By Paul Fitzgerald in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 19-Mar-2005, 21:31

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •