Results 1 to 4 of 4

Thread: Jobo drum question

  1. #1
    runs a monkey grinder Steve M Hostetter's Avatar
    Join Date
    Jul 2008
    Location
    Beech Grove Indiana
    Posts
    2,293

    Jobo drum question

    Hello,,

    I have a 2840 Jobo drum.. I need to no what the smaller section of the drum is.. Is it a 2500 series drum..?

    I'm wondering if the Duo-set 2502 reel will fit..

    thx

  2. #2

    Join Date
    Aug 2008
    Location
    Germany
    Posts
    1,384

    Re: Jobo drum question

    28xx are paper development drums. The actual drum body is identical with 25xx series film drums, but they are sold with a cup-type lid and wall-clip dividers rather than a funnel lid and central column.

    The reel will fit only if you already have the innards (central column and funnel lid) of a matching film drum (2583) or enough spare Jobo tank bits to make up the same (as the system is modular and interchangeable there are many ways to arrive at the right amount of column parts from 15xx and 25xx tanks). Besides that, a 28xx can also be used for rotatory sheet film development if you shoot sizes held by the dividers (9x12cm, 10x15cm, 13x18cm and many bigger ones, but no 4x5", at any rate on the drums marketed in Europe) and shoot film whose backing does not resent wall contact or which can be cleared and washed later on outside the drum...

    Many of my film drums have over the course of more than two decades been replaced by 28xx, as the sealing failures that killed the old ones always affected the parts common to both systems, and I have often lost divider clips while all my funnels and columns never went missing or broke.

  3. #3
    runs a monkey grinder Steve M Hostetter's Avatar
    Join Date
    Jul 2008
    Location
    Beech Grove Indiana
    Posts
    2,293

    Re: Jobo drum question

    Hello Sevo,,

    So I guess I need a different drum for film..? I guess my question is what drum would I need to use for a Duo-set 2502 reel ,, a 2500 series drum and will that work with a Jobo CPE2 processor..?

  4. #4
    ic-racer's Avatar
    Join Date
    Feb 2007
    Posts
    6,763

    Re: Jobo drum question

    Quote Originally Posted by Steve M Hostetter View Post
    Hello,,

    I have a 2840 Jobo drum.. I need to no what the smaller section of the drum is.. Is it a 2500 series drum..?

    I'm wondering if the Duo-set 2502 reel will fit..

    thx
    I think the little one is 2820 ("test drum").

Similar Threads

  1. Jobo drum question
    By Steve M Hostetter in forum Darkroom: Equipment
    Replies: 16
    Last Post: 23-Jan-2012, 07:29
  2. jobo drum expert 3006
    By pdeeee in forum Darkroom: Film, Processing & Printing
    Replies: 10
    Last Post: 30-Jul-2008, 12:05
  3. Replacing a Jobo Cog on an Expert Drum
    By Robert Ruderman in forum Darkroom: Equipment
    Replies: 2
    Last Post: 11-Feb-2008, 13:15
  4. 5x7 film in a Jobo 3005 Expert Drum
    By Don Hutton in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 21-Apr-2007, 19:43
  5. Washing Negatives in a Jobo 3006 Drum
    By Robert Ruderman in forum Darkroom: Film, Processing & Printing
    Replies: 17
    Last Post: 1-Dec-2006, 07:31

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •