Results 1 to 9 of 9

Thread: Question about field Camera Focusing Bed

  1. #1

    Join Date
    Mar 2009
    Location
    Colorado / California
    Posts
    83

    Question about field Camera Focusing Bed

    Today I had a problem with my nearly 30 year old Wista DX. I was at 14,000 feet on Mt. Evans in Colorado and it suddenly turned quite cold. In fact it started to snow. My Wista focusing rack suddenly just seemed to freeze up. The focusing rails on the bed are wood against wood and they have at times been stiff. Is there any way to lubricate these rails. I finally got it working and cleaned the rails but I'm afraid this problem might return. Does anyone have any experience or ideas about this.

  2. #2
    Octogenarian
    Join Date
    Sep 2003
    Location
    Frisco, Texas
    Posts
    3,532

    Re: Question about field Camera Focusing Bed

    Not unusual for wood focusing rails to shrink or swell under conditions of extreme temperature and/or humidity.

    Rubbing the dry rails (at room temp.) with a good grade of furniture polish will help solve the problem.

    I'm sure others will chime in with the name of their favorite brand of wood preservative.

  3. #3

    Join Date
    Jan 2009
    Location
    Holland + Brazil
    Posts
    558

    Re: Question about field Camera Focusing Bed

    I never had this problem before as a repairman, but one would think of a wood oil first.

    Some caution: do not let the oil come into the bearing of the focussing-rod !
    Put a drop of fine machine oil (used for sewing machines i.e.) at the bearing first !

    Any non-petroleum, non-synthetical oil contains resin that hardens over time.

    I have some hard wood over here and do a test in the comming day's with a synthetical grease and see how that workes out.

    Is your Wista the red one ?

    Peter

  4. #4

    Join Date
    Mar 2009
    Location
    Colorado / California
    Posts
    83

    Re: Question about field Camera Focusing Bed

    I have the brown cherry wood model.

  5. #5

    Join Date
    Jan 2009
    Location
    Holland + Brazil
    Posts
    558

    Re: Question about field Camera Focusing Bed

    I just asked because the synthetic grease I normaly use for gear is reddish.....
    This grease is aircraft-rated, Mil spec's and so on.
    Let me test and get back to you.

    Peter

  6. #6

    Join Date
    Aug 2009
    Location
    Mansfield. Victoria. Australia
    Posts
    121

    Re: Question about field Camera Focusing Bed

    Hi there;
    you could try some bees wax,its was used quite a bit by carpenters and cabnit makers in the old days,should be a good lubricant,
    hope this helps

  7. #7

    Join Date
    Jan 2009
    Location
    Holland + Brazil
    Posts
    558

    Re: Question about field Camera Focusing Bed

    Without seeing the camera:

    Clean the surfaces with a damp micro-fiber cloth.
    I am not shure whether the wood of the camera is oiled or has a clear coat.
    It has been over 25 years that I had a wooden Wista in my hands.

    In any case you can use a good wood oil to keep the moisture out of the wood and to prevent it shrinking and expanding too much with changing humidity.
    Please do check the alignment of the focussing mechanism.

    If this does not help I would use some lithium based synthetic grease, like Mobilgrease 28, onto the sliding surfaces.
    A very light coat will do.

    Peter

  8. #8

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,410

    Re: Question about field Camera Focusing Bed

    Before you go to far you might want to call Wista service for the USA and ask them what they would use. That way you would not end up using something that might make the problem worse.

    252 652 4401 is their phone number.

  9. #9

    Join Date
    Mar 2009
    Location
    Colorado / California
    Posts
    83

    Re: Question about field Camera Focusing Bed

    Funny thing. The next day after wipeing down the rails in a nice dry motel room the problem went away. We went back up the mountain to about 12,000 feet and I had no trouble at all. I'm going to clean the rails more now that I'm home with a microfiber cloth and see if things work out . Thanks to all who provided input on the subject. It's nice to have others out there to consult with. The only advise I have for you in return is that if you want to keep photographic pease around the house get your wife a Chamonix.

Similar Threads

  1. What Kind of Camera? (Finding Camera Manufacturers)
    By cblurton in forum Cameras & Camera Accessories
    Replies: 32
    Last Post: 26-Nov-2006, 22:56
  2. Finding a field camera equivalent to your monorail
    By David R Munson in forum Cameras & Camera Accessories
    Replies: 29
    Last Post: 21-Apr-2006, 12:41

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •