Some of us tried Ziplock bags when somebody else suggested it. It works, one at a time.
Randy if you already have deep tanks and hangers gas burst can be DIY.
I do use stuff made by somebody else.
But I will be trying some other ideas. All you need to try Gas Burst is a Poly tube with tiny holes, attach a timing valve and any adjustable 10+ psi air supply. Maybe a full tire...I use my shop air compressor.
It takes a while to tune it, but once it's set, it runs and runs.
I burst for 1 second 10 PSI every 10 seconds for 10 minutes usually. Water rise should be 1/2 to 1". I go low. You don't need N2 for one shot developer or any fixer.
Bookmarks