Steve, I have some 11x14 Azo from the 70's that I print my 11x14 negatives on when I do silver printing. I always use my vacuum frame with my 11x14 and 8x20 negatives. i would suggest you find a vacuum frame. They come up on the net from time to time and are very handy to have. i use mine all the time and especially now as I am getting away from silver printing and doing 11x14 and 8x10 and 8x10 carbon transfer. My Azo stash lies in wait but may never be used.
Jim
If you have large negatives for contact printing you may also want to consider coating your own paper and printing with an alternative process. Vandyke and kalliitype are easy to work, relatively inexpensive, and very permanent if you tone the print with gold, palladium or platinum. And then there is palladium and various combinations of platinum and palladium. Price for metal salt and paper can range from less than the cost of silver gelatin papers to more, depending on how you purchase the metal salts, and choice of paper.
But it is fun, not that hard to coat, and you free yourself forever from concerns about loss of factory coated paper.
Sandy King
Steve,
I'm sure Michael Smith would be more than happy to take your order, but you will have to visit the site, select the paper you want and either pay via credit card or send a check to place your order. http://store.michaelandpaula.com/ind...=index&cPath=1
Best,
Thank you Jim,Sandy,John.. I'll give Michael a call here soon..
Everyone that was recommending using a contact printing frame is spot on.
I purchased a 11x14 contact printing frame from B&S and it could not come close to the visual results obtained from a vacuum frame holding 23# of negative pressure. The contact printing frame simply sucked so I sold it.
Considering the cost of the ULF sheet film and the time and expense to get you to the printing stage, there is no sense in being cheap when it comes to putting this horse in the barn. Get a vacuum frame and move on.
Cheers!
I just ordered 1 - 14x17" Starfire 1/4" polished edges cut glass at a local glass store..
Starfire is the name of the ultra clear glass(not green) , cost: $26.25 + 14.08 polish edges..Takes 2-3 days to get in(so he says).. Now I will proceed to get black construction paper and cut my mats for centering.. I'm thinking I should use the cheaper glass as a backing for flatness..?
I will also recommend Lodima paper for silver processing. Light source is simple too. See my other post on light sources as a simple bulb will work...I don't use fancy glass either. cheap window glass from ace hardware. A nice contact printing frame is helpful. I don't use a vacuum frame and my prints a SUPER sharp. Check website for images, www.scottpetersphotography.com
As for grade of paper....depends on your negs.....I prefer grade 3.
Best of luck. Scott
Bookmarks