Results 1 to 5 of 5

Thread: industar lens

  1. #1

    Join Date
    Nov 2008
    Location
    louisville, ky
    Posts
    13

    industar lens

    I've seen some industar lens's in the 210mm range that actualy seem pretty cheap. I know that russian lens's can be decent but they don't seem like you can attach them to a shutter. How hard would it be to adapt one of these to a 4x5 view. There has to be a way isn't there, I mean they can't just use a hat over the lens for a shutter can they?

  2. #2

    Join Date
    Oct 2004
    Location
    S.W. Wyoming
    Posts
    1,137

    Re: industar lens

    Hat, lens cap, old inner tube, etc., you name it, it's been used as shutter at ome time or another. Lots of folks buy those lenses only to find out what it would cost to fit them to a shutter. A lot of bucks, if you can find someone to do it. A Packard shutter behind the lens board would give you about 1/25 of a second with practice. Considering even the price of a used Packard, I don't feel it's worth it. Those particular lenses aren't that great, according to reports I've heard. If you have the bucks to buy one, have it shipped, then have to find a way to shutter it, you could take those same bucks and buy something worthwhile. A decent Tessar in a working shutter, for example.

  3. #3

    Re: industar lens

    I found an uncoated Schneider Xenar 21cm in a compound shutter at around $110-120. This is a very sharp lens which I use too little. (As I really bought it for the shutter... My barrel Heliar did drop right into it without any hassle at all.)
    For that particular lens, intended for portrait work (i.e. the Heliar), that shutter is just the right thing. Doing portrait work with an LF camera is a bit "retro", so the nice sound of the compound really adds to it. I do think the Xenar would be really nice at the same type of work, but I havn't tested that yet.

    The only drawback is that these both lenses are uncoated, so flare can be a problem, unless care (i.e. a good shade) is taken. Else there is really no big difference from modern glass.

    //Björn

  4. #4
    Zheng L. kilimanjaro1996's Avatar
    Join Date
    Jun 2008
    Location
    San Francisco Bay Area
    Posts
    44

    Re: industar lens

    All those Tessar formula lenses in 210mm range are quite good for portraits. I have bought quite a few of them to compare, and the uncoated ones are nice and soft. I have a Packard shutter and asked someone to build a box around it. But since I plan to do more color work, I just got a Sinar Copal shutter. The world of barrel lens is quite fun and inexpensive too.
    Zheng L.

  5. #5

    Join Date
    Aug 2008
    Location
    Germany
    Posts
    1,382

    Re: industar lens

    Apart from the Industars the market is packed with cheap (I bought the last ones for 10€ used and 40€ new in factory wrap) 210/4.5 Carl Zeiss Jena or Meyer Görlitz (the production presumably got relocated within Pentacon some time in the eighties) barrel mount Tessars - apparently Pentacon rolled out far more lenses than matching large format cameras.

    The GDR large format Tessars are generally quite high build and glass quality. The Industars I've seen were essentially the same lens (either OEMed by or built under license from Pentacon), but very often in much worse production quality.

    Good Industars and all CZJ/Meyer Tessars are fine and a good bargain, if you have any use for a lens with such a limited coverage and (compared to recent Schneiders, Rodenstocks or Nikkors) relatively low contrast, but (for a large format non-process lens) unusually high resolution. But as they cannot be economically shutter mounted (since they don't split into elements that match standard shutters) they are only a serious option for people that have a behind the lens or focal plane shutter, or can make do with shutterless operation. Beyond that, they are not worth while, a complete rebuild into another barrel would buy you several more modern, wider coverage lenses complete with shutter...

Similar Threads

  1. lens hood
    By epack in forum Cameras & Camera Accessories
    Replies: 66
    Last Post: 22-Dec-2008, 21:26
  2. Can bellows "stretch" lens?
    By Ken Grooms in forum Cameras & Camera Accessories
    Replies: 19
    Last Post: 25-Oct-2006, 19:35
  3. When to switch to a macro lens?
    By William Mortensen in forum Lenses & Lens Accessories
    Replies: 32
    Last Post: 22-Jun-2006, 08:46
  4. Picking ideal lens and fl, for flat copy work
    By bglick in forum Lenses & Lens Accessories
    Replies: 21
    Last Post: 8-Feb-2006, 21:49
  5. How to picture an enlarging lens in practice?
    By John D Gerndt in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 2-Jan-2004, 11:52

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •