I will be developing 4x5 bw negs in an 11x14 Unicolor Drum. Am I correct that I will need 500ml of developer/water. I'll be using D-76.
Thanks, John
I will be developing 4x5 bw negs in an 11x14 Unicolor Drum. Am I correct that I will need 500ml of developer/water. I'll be using D-76.
Thanks, John
I use 250ml in a 8X10 drum so I would think that 500 should be sufficient. However the 11X14 unicolor drum (in my experience) will not hold a 4X5 sheet.
If it's the same drum I had it held 6 ozs in the little tray before it dumped it on rotation. Mine had removable guides that let you put up to 8 4x5s in it. It worked fine for a while then started popping all the negatives out as soon as it started rotating, of course resulting in them bouncing around and damaging each other. I still don't know why it does this, it seems like it was when I switched from Tri-X to T-max. Could the backing make a difference, or the stiffness of the film, or could it be cut slightly different?
Bookmarks