Results 1 to 7 of 7

Thread: Help mounting glossy prints.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Rio Oso shooter
    Join Date
    May 2006
    Posts
    203

    Help mounting glossy prints.

    I really need help mounting glossy prints like Endura Metal and Fuji Super Glossy prints. I have used simple ways to mount prints for myself but people are asking for prints now. I am flattered but at the same time it is a hassle. I am testing different methods for mounting 16X20 images with a 2" border. I know this has been done to death but here goes. I had a glossy print dry mounted on foam core and it came out well but there is a slight dimpling effect. I would suspect that under glass it would all but disappear. I had it done by a local shop and I am sure it is the best that they can do because they were very proud of it. If I have WCI print and mount will I still have that same problem? If not, why? Do they sand the board before mounting? Gator board has about the same finish so is it possible to mount on something extremely smooth? I know that I can corner mount and because of the border the image will retain the original size. I like this also because when I print the border I can make it a particular color to bring out what I want and mat a 1/4" outward with a standard mat. It looks very good if the proper color and density is chosen. Is there a good book to get on mounting?

    Thanks for the help,
    Richard

  2. #2

    Join Date
    Aug 2006
    Location
    St. Louis, Missouri
    Posts
    323

    Re: Help mounting glossy prints.

    I don’t know anything at all about those papers but dry mounting on foam core is a bad idea. It is too soft and any undue pressure will dent or dimple it. However you mount, you should use a 4 ply archival mat board behind the print.
    Jerome

  3. #3

    Join Date
    Feb 2009
    Location
    Payson, AZ
    Posts
    163

    Re: Help mounting glossy prints.

    Dry mounting isn't really necessary for a 16x20 on thick papers. Just use linen tape T hinges but be sure to put them where the mat will cover the part of the hinge that's on the back of the print. They can show thru otherwise.

    I've found it very hard to dry mount super gloss without getting an orange peel effect. And that was on Gatorboard, very smooth. If anything use archival matboard to mount to; Gatorboard is hard but isn't archival.

  4. #4
    bob carnie's Avatar
    Join Date
    Jan 2004
    Location
    Toronto, Ontario,
    Posts
    4,560

    Re: Help mounting glossy prints.

    Cold Mounting to Dibond seems to be the smoothest I have seen, getting rid of the orange peel effect has always been problematic in the past.
    We have switched over to Dibond for critical work and have been very happy with the result.

  5. #5
    caleb's Avatar
    Join Date
    Jan 2008
    Location
    traveling the continent in a vintage airstream
    Posts
    42

    Re: Help mounting glossy prints.

    I have had great success with both of those papers. I drymount on aluminum in my vacuum press with colormount or mt5. I have recently been playing with the dibond material and it works really well also.

  6. #6
    Drew Wiley
    Join Date
    Sep 2008
    Location
    SF Bay area, CA
    Posts
    14,139

    Re: Help mounting glossy prints.

    The smoothest foam-type board available is called Ultraboard. Gator needs light sanding in order to get adhesion. Do not use museum board like you do for b&w prints,
    and do not drymount or use spray adhesives. You need a high-pressure roller system
    and a correct adhesive film. Expect to spend some bucks. Or you could order board
    precoated from someone like Oregon Lamination. A slip sheet of silicone paper (like you use for drymounting) is useful. It's like rolling out Formica. For plastic-based prints
    you could try static mounting, but this won't work in damp weather. RC prints won't static mount. Save your bum prints to experiment with. Expect to encounter a lot of
    bad information (including a few uninformed statements already on this thread).
    Dibond is great for big display prints but pricey. Just remember that getting a good
    smooth finish at the outset doesn't always solve the problem - adhesives can fail over
    time. There are a lot of tricks to it.

  7. #7

    Re: Help mounting glossy prints.

    Quote Originally Posted by Drew Wiley View Post
    Do not use museum board like you do for b&w prints,
    and do not drymount...
    Why not, Drew?? I just started printing color on Fuji Super C glossy and was planning on dry mounting on 2 and 4 ply museum board

    Keep Shooting!

    Thomas

Similar Threads

  1. Glossy paper for black and white digital prints
    By Ed Richards in forum Digital Hardware
    Replies: 3
    Last Post: 24-Mar-2007, 12:54
  2. Archival Glossy Inkjet Prints
    By Mike Chini in forum Digital Processing
    Replies: 10
    Last Post: 22-Apr-2006, 15:06
  3. Mounting Chromira(Crystal Archive) prints
    By Vance Gese in forum Business
    Replies: 3
    Last Post: 27-Mar-2006, 12:24
  4. cutting prints & dry mounting question
    By Raymond Bleesz in forum Business
    Replies: 6
    Last Post: 1-Jun-2004, 20:21
  5. Mounting Digital Prints to Backing Board
    By chris jordan in forum Digital Hardware
    Replies: 4
    Last Post: 11-Dec-2001, 22:00

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •