I recently bought a Jobo 2840 drum to print R4, lid came with the funnel which I removed by twisting. The cup doesn't have the tabs the funnel has, anyone know the right way to attach it to the lid?
I recently bought a Jobo 2840 drum to print R4, lid came with the funnel which I removed by twisting. The cup doesn't have the tabs the funnel has, anyone know the right way to attach it to the lid?
http://www.jobo.com/joboint/products/images/03042.jpg
You can see the tabs on both.
The cup I have doesn't have tabs, anyone know if Jobo analog still exists?
Omega handles Jobo in the USA now. I don't know if they have spare parts or not.
OTOH between the cost of the part and shipping it won't be much cheaper then buying an used drum.
Or if you don't need to switch back to the funnel just glue the thing in place. One of mine is glued because a tab broke off.
I had a lid with a cup like the one you describe... the cup was held in with 3 plastic hooks. It must have been an older short-lived version for the 25xx drums... I have a spare Jobo Test drum (same as Multi-Tank 2) with a cup lid if you're interested - PM me. I take it you're using the magnet coupling.
Jim
Bookmarks