Problem of scanning 8X10 films

[Daisy]

The Epson allows the machine to select auto border or manual. Do a Prescan. Leave the settings on auto marque and check to see if it's chopping off the edges. If so, switch to manual adjustments and adjust the marque to fit the film size.

Scan Area is Not Adjustable in Thumbnail Preview
If you cannot adjust the scan area while viewing a Thumbnail preview in Epson Scan, try these solutions:
• Create a scan area by drawing a marquee on your preview image and adjusting it as necessary.
• Adjust the thumbnail cropping area using the Thumbnail Cropping Area slider in preview mode.

Thank you for your kind suggestion! But that's what I did: I did a prescan and adjust the scan area manually.

[Daisy]

Read pgs 30-33 in the V850 manual for how to place and use the film area guide for 8x10.

https://files.support.epson.com/docid/cpd4/cpd41530.pdf

Thank you! I read that too before I did the scanning.

[Kino]

Try checking your upper light cover and make sure it is mounted squarely on the scanner.

Remove it, examine the hinges and the slots that the scanner backlight slide into and the surrounding area to be sure nothing conflicts with the proper closing of the lid.

It might be an alignment issue that would not show up until you get to the very margins of the scanner platen. Smaller formats would not show this problem, as you are scanning images no where near the edge of the scanner...

[gypsydog]

Or, the photography gods are trying to tell you something. Perhaps, Stop It! print those things the way the gods intended, by contact.

[Daisy]

Try checking your upper light cover and make sure it is mounted squarely on the scanner.

Remove it, examine the hinges and the slots that the scanner backlight slide into and the surrounding area to be sure nothing conflicts with the proper closing of the lid.

It might be an alignment issue that would not show up until you get to the very margins of the scanner platen. Smaller formats would not show this problem, as you are scanning images no where near the edge of the scanner...

Thank you for your kind suggestion! I'll have a try

[Daisy]

Or, the photography gods are trying to tell you something. Perhaps, Stop It! print those things the way the gods intended, by contact.

That's an amazing suggestion! Thank you

[Tin Can]

I have stopped using my EPSON V700

It works perfectly

I only need scans for this forum

oddly

I use a current iPad and copy with it

Very quick and exceeds LFPF Limits

I use an ancient Leitz as it has a removable head for COPY WORK

Make it easy for you

[Daisy]

I have stopped using my EPSON V700

It works perfectly

I only need scans for this forum

oddly

I use a current iPad and copy with it

Very quick and exceeds LFPF Limits

I use an ancient Leitz as it has a removable head for COPY WORK

Make it easy for you

Thank you for your comment

[Tin Can]

My problem is 16mm chromes on paper mounts

Vietnam era shot on Okinawa

They are uneventful

[Peter De Smidt]

To the original poster, did you figure it out?