Plan for a 8x10 springback, anyone ?

[Yourix]

I was more specifically asking for technical drawing if anybody has that.
6,6mm +/- 0,4mm is the value I found for "T" and this is the most critical of all. I have at hand a 8x10 holder and it will let me design the back but I tought somebody had already done the job and was ok to share it.

Guess I'll give it a try and if this is successfull I'll come back here to share my plans for the next DIYer

[Tin Can]

Don't get mad, please

I wood use hobby wood with correct thickness for rails

I made a a GG with glass and that wood in correct size in minutes

It fits where a DDS fits

A bigger problem is the light trap

[Yourix]

I'm not mad at all ;-)
For the moment i'm building a lens board adapter and bellow frames, the 8x10 back is my next project. I'll come back here to share it when it's done... After a few month probably...

[Yourix]

Hi there
I had some spare time and began to draw a 8x10 back on Sketchup.

This fill my need but can be easily adapted... I can share the 3d file if somebody want's it but it come with absolutely no warranty that a back built from it will work.
It is still a work in progress and I'll share further improvements here.