Paper tables for Durst Pictograph

[sruddy]

Hi All,
My enlarger has paper channels and tables. The tables as you can see from the photo below, tell the enlarger how to set the filters. The enlarger came with 5 preprogrammed tables, one of which is for ILford Multigrade IV. I use the new Deluxe version now, and I also use their Art 300, and MG Fiber papers. I have no tables for them and was wondering how to figure out the figures for those papers so I can make tables for them and what I need to adjust on the MG IV table for the new Deluxe version.
Thx

[ic-racer]

https://www.photrio.com/forum/thread...or-head.42839/

[gary mulder]

To calibrate you can make a print with a step-wedge. First calibrate the grade 2,5 to match the density 0,70 from the step-wedge with the print. Alter the exposure the way it is described in the manual 4.3 "New Cal" After that alter the filtering for grade 2,5 to match a iso grade 100. When you got the grade 2,5 print from the step-wedge right. Both density and grade you can work your way through the other grades. The density from the step-wedge 0.70 must be 0.70 in all grade prints. Do not alter the exposure for the other grades the way you altered that of grade 2.5. But with the value D-comp.