Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: Acrylic 4x5 film drying rack recommended?

  1. #11

    Join Date
    Aug 2000
    Location
    California
    Posts
    3,908

    Re: Acrylic 4x5 film drying rack recommended?

    I use dental x-ray clips. Free from friendly dentists who have gone to digital x-ray.

  2. #12

    Join Date
    Jan 2019
    Posts
    779

    Re: Acrylic 4x5 film drying rack recommended?

    I always used clips until I got this not long ago:

    https://www.ebay.com/itm/14476416566...mis&media=COPY

    I have the 10 sheet ones. Has holes to drain around the “V”’s at the bottom. Works wonderfully.

    No more marks on my sheets, no more sheets falling to the ground due to clipping clumsiness….

  3. #13

    Join Date
    Jan 2019
    Posts
    196

    Re: Acrylic 4x5 film drying rack recommended?

    I have some of the Kodak equivalent of the Xray clips. IIRC I cut them from some sheet film hangers then drilled a hole in them. Would have been much easier to just buy those clips. Where were you guys all those years ago, hmmm??

  4. #14
    Niels
    Join Date
    Jan 2022
    Location
    Denmark
    Posts
    139

    Re: Acrylic 4x5 film drying rack recommended?

    Quote Originally Posted by Vaughan View Post
    I bought some cheap stainless steel clothes pegs, used a centre punch to put two points on each side to stop the film from slipping out.

    https://www.ebay.com.au/itm/293232951928
    I found the same clips on Amazon.de when I started out with 4X5 last year. I wasn't too comfortable with wooden pegs and these caught my eyes.
    They are well made and cheap.
    I run the string through the holes in the handle.
    ----
    Niels

  5. #15

    Join Date
    Jan 2022
    Posts
    2

    Re: Acrylic 4x5 film drying rack recommended?

    Anybody use the IKEA SLIBB Hang dryer 24 clothes pegs (Article Number 405.270.76)? Our family just picked one up for $CAD 7.00 for laundry, but I can envision other uses in the future.
    I have been using fold-back binder clips on coat hanger bent to saddle each of six clips.

  6. #16
    Cor's Avatar
    Join Date
    Nov 2006
    Location
    Leiden, The Netherlands
    Posts
    765

    Re: Acrylic 4x5 film drying rack recommended?

    Bit late but I use the Combiplan 4*5 film holders to dry my film. I have a JOBO Mistral dryer which I let blow for 1-2 minutes on highest heat, switch off and place the Combiplan holder in. After a night drying the negatives are completely dry.

    Best,

    Cor

  7. #17

    Join Date
    Apr 2021
    Posts
    4

    Re: Acrylic 4x5 film drying rack recommended?

    You could consider this:

    https://simonforsterphotographic.co....40564826406994

    I haven't tried it, but am considering getting one, if only to support one of the creators of the Large Format Photography Podcast.

    https://largeformatphotographypodcast.podbean.com/

  8. #18
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,518

    Re: Acrylic 4x5 film drying rack recommended?

    I vastly prefer single point KODAK clips

    VERY hard to find

    I found NOS in box last decade
    Tin Can

  9. #19

    Re: Acrylic 4x5 film drying rack recommended?

    I use clothespins and have never had objectionable marks.

    If this is really a concern for you, use dental X-Ray film hanger. They will leave nearly no mark behind.
    Silver Photographers Never Die, They're Just Getting Fixed

    My Stuff: https://www.tundraware.com/Photography
    Reference Material: https://photoarchive.tundraware.com/

  10. #20
    Drew Wiley
    Join Date
    Sep 2008
    Location
    SF Bay area, CA
    Posts
    18,399

    Re: Acrylic 4x5 film drying rack recommended?

    Acrylic doesn't make a lot of sense if forced air drying is involved, since it is electrostatic and attracts dust, more than even the film base itself. But the drying chamber air should be highly filtered regardless. I prefer passive drying using a nylon clothesline over the sink.

Similar Threads

  1. US Navy Over-Sink Drying Rack
    By Michael_Fuller in forum LF DIY (Do It Yourself)
    Replies: 2
    Last Post: 17-Jan-2020, 12:24
  2. opinions on the mod54 drying rack
    By dave4242 in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 27-Dec-2019, 11:39

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •