Great start!
File some finger grips for back removal. I used a quality Sinar to smallr board from Ebay for cheap which I mounted to the camera, and then I used Toyo 110 boards. Linhof technica boards would also work great, if that's what your other lenses are on....with the appropriate adapter, of course. With my Intrepid, the lens panel slide wasn't too confidence inspiring. If the screws were a hair too tight, it wouldn't work. Too loose, and ,well, not good. I put in the metal adapter board and tightened the Intrepid screws firmly. (Note: Firmly on a camera is not like a lug nut!)
Bookmarks