Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: Need box/tent to load 4x5 film

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Sep 2022
    Posts
    32

    Need box/tent to load 4x5 film

    Greetings to everyone.
    I am new in here i hope I am posting on the right place.

    I need a changing tent or large box-bag for loading 4x5 film.
    Any of you have experience with the Chinese options popular at ebay?
    I saw some old Harrison, too, but they are too old and may not hold much longer.
    Any suggestions or advice?
    Thanks

  2. #2
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,517

    Re: Need box/tent to load 4x5 film

    Seal off a bathroom or closet

    I hate those bags
    Tin Can

  3. #3

    Join Date
    Sep 2022
    Posts
    32

    Re: Need box/tent to load 4x5 film

    At home I have a room.
    I need it for travel, something light and easy to carry.
    But thanks for the suggestion.

  4. #4
    Niels
    Join Date
    Jan 2022
    Location
    Denmark
    Posts
    139

    Re: Need box/tent to load 4x5 film

    Put a cardboard box into a large changing bag. It works for me.
    ----
    Niels

  5. #5

    Join Date
    May 2015
    Location
    SooooCal/LA USA
    Posts
    2,803

    Re: Need box/tent to load 4x5 film

    Quote Originally Posted by nitroplait View Post
    Put a cardboard box into a large changing bag. It works for me.
    Did this on some commercial shoots, but noticed some debris in changing bag after box was removed... Will the debris end up on film???

    Evolved for me to adapt one of those wire file hanging racks from a file cabinet drawer... The pointy ends were made dull to prevent damaging bag... They collapse flat, and there is more room in the bag as the supports are slender, and the right size for a large bag... I can load 8X10 easily in mine...

    Steve K

  6. #6

    Join Date
    Feb 2008
    Posts
    399

    Re: Need box/tent to load 4x5 film

    Quote Originally Posted by LabRat View Post
    Did this on some commercial shoots, but noticed some debris in changing bag after box was removed... Will the debris end up on film???

    Evolved for me to adapt one of those wire file hanging racks from a file cabinet drawer... The pointy ends were made dull to prevent damaging bag... They collapse flat, and there is more room in the bag as the supports are slender, and the right size for a large bag... I can load 8X10 easily in mine...

    Steve K
    This could be a continuation of evolution : https://www.amazon.com/dp/B00N2380FY...xpY2s9dHJ1ZQ==
    Size may vary

  7. #7

    Join Date
    Sep 2022
    Posts
    32

    Re: Need box/tent to load 4x5 film

    Quote Originally Posted by SergeyT View Post
    This could be a continuation of evolution : https://www.amazon.com/dp/B00N2380FY...xpY2s9dHJ1ZQ==
    Size may vary
    What a wonderful suggestion. I like how the evolution is turning out. If I could sew, I will definitively follow this route by making a large bag matching the convenience of the bag with the hollowness of a tent. Thanks.

  8. #8
    Niels
    Join Date
    Jan 2022
    Location
    Denmark
    Posts
    139

    Re: Need box/tent to load 4x5 film

    Quote Originally Posted by LabRat View Post
    Did this on some commercial shoots, but noticed some debris in changing bag after box was removed... Will the debris end up on film???
    Steve K
    It is a good point. It may, although I haven't experienced it.
    I use a glossy coated box (some electronic device came in it) and taped the cut edges where debris would potentially come from. It folds flat so it is easily portable, but I only use it at home.
    ----
    Niels

  9. #9
    Fine Art & Architect
    Join Date
    Nov 1999
    Location
    Chicago, Illinois
    Posts
    56

    Re: Need box/tent to load 4x5 film

    great idea

  10. #10

    Join Date
    Mar 2005
    Location
    Newbury, Vermont
    Posts
    2,292

    Re: Need box/tent to load 4x5 film

    Niels the box-in-the-bag idea (for use when traveling) is great! Will try this!

    Otherwise, when I'm traveling and staying in at least occasional hotel rooms, I'll seal off a bathroom door with black tape which I buy cheap (because I use lots) from our local Job Lots store. Sometimes I'll also use a rolled up towel (or my dark cloth if the towel is not enough) under the door because that area is often difficult to seal with tape alone.

    Another good use of a dark cloth is to use it to seal off a window. I'll usually bring a plastic 35mm film can of push pins which I can use to affix the dark cloth around a wooden window frame, placing these along the top and sides for two reasons...that this is more effective than running them across the faces of these frames, plus the little holes this creates won't be as visible to hotel staff! But sometimes the pins alone are not enough and I'll need to supplement with a bit of tape. Just be really careful not to peel off any wall paint!

    But the thing about hotel bathrooms aside from needing to pre-clean flat working surfaces are various sources of light which might not be noticed until its too late. Things like florescent fixtures which glow after they're shut off...small blinking lights on smoke detectors...and/or (more typically in the case of "cheap" hotels) - light coming through utility holes (like for pipes and wires) in the walls.

    So its always best, after "sealing off" an unfamiliar space...to wait for a bit - before unwrapping your precious film - to let your eyes adapt to the the dark to see if the dark is truly dark!

Similar Threads

  1. Film from the Fridge and Load
    By duranduran0201 in forum Style & Technique
    Replies: 4
    Last Post: 28-Jun-2012, 23:13
  2. No high speed film in quick-load/ready-load.
    By Renato Tonelli in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 5-Dec-2007, 18:10
  3. Framing after you load the film
    By Sizam in forum Style & Technique
    Replies: 7
    Last Post: 15-Aug-2007, 11:21
  4. Using a tent to load holders, looking for advice.
    By Robert Skeoch in forum Cameras & Camera Accessories
    Replies: 11
    Last Post: 16-Jul-2004, 10:25
  5. Load sheet film
    By Sorin Varzaru in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 26-Jan-2001, 18:28

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •