The viewfinder for my GX617, in this case, the 300mm viewfinder uses a piece of film that is glued to a metal bracket to show the image area and also what viewfinder it is. The glue on mine failed and I need to glue it back to the metal cage. The "film" part seems to be similar to photographic film of some kind, but I'm unsure what kind of glue I should use. Maybe contact cement? Someting better? The glue needs to be fairly slow drying because I have to align the film with the alignment circles so I will need to wiggle it around for a bit. What I thought were alignment holes that I could maybe stick a small wire to help align are just clear circles on the graphic, but I could shine a light up and use that for alignment.
Bookmarks