Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Show your 3D printed LF photography related thing

  1. #11

    Join Date
    May 2019
    Location
    Stockholm, Sweden
    Posts
    322

    Re: Show your 3D printed LF photography related thing

    Did a small print today. Almost to simple to even mention perhaps.
    But something I thought about a for some time.
    A filler for my Jobo drums. To help lower the amount of chemicals needed when doing rotary processing.

    This first one is for developing one 120 roll in my 2236 tank.
    Think I can go from 300 ml to 200ml.

    Printed in PETG so it should be OK with chemicals.
    It might yellow in the long run so subsequent print might be black instead.

    Click image for larger version. 

Name:	IMG_7374.jpg 
Views:	31 
Size:	74.2 KB 
ID:	221955Click image for larger version. 

Name:	IMG_7375.jpg 
Views:	28 
Size:	63.1 KB 
ID:	221956Click image for larger version. 

Name:	IMG_7376.jpg 
Views:	24 
Size:	47.0 KB 
ID:	221957

  2. #12
    Ron (Netherlands)'s Avatar
    Join Date
    Nov 2011
    Location
    The Netherlands
    Posts
    583

    Re: Show your 3D printed LF photography related thing

    Nice, but wouldn't it be easier to use a simple plastic clip to hold down the spiral - I have good experience with those (clips used to attach electrical hoses against a wall)
    __________________
    When day is done......

    My Flickr

  3. #13

    Join Date
    May 2019
    Location
    Stockholm, Sweden
    Posts
    322

    Re: Show your 3D printed LF photography related thing

    Quote Originally Posted by Ron (Netherlands) View Post
    Nice, but wouldn't it be easier to use a simple plastic clip to hold down the spiral - I have good experience with those (clips used to attach electrical hoses against a wall)
    Well, yes if you are developing with the tank i vertical position this adds nothing. Then a clip is indeed a better choice.
    This is intended for use on a roller or processor like a Jobo CPP processor with the tank in horizontal position. To diminish the volume needed when developing in less than full tank.

  4. #14

    Join Date
    Apr 2021
    Posts
    7

    Re: Show your 3D printed LF photography related thing

    Here's my 3d printed 4x5 camera, designed in fusion 360. Mated to a graflock back, 120 roll adapter (6x6,6x9 or 6x12), but I can also attach a graflex ground glass for shooting 4x5.

    Distance scale or groundglass focusing.

    Click image for larger version. 

Name:	20211217_093554.jpg 
Views:	58 
Size:	27.1 KB 
ID:	222518
    Click image for larger version. 

Name:	20211217_093627.jpg 
Views:	67 
Size:	23.2 KB 
ID:	222519
    Click image for larger version. 

Name:	20211217_093611.jpg 
Views:	51 
Size:	28.7 KB 
ID:	222520

    I'm paranoid of light leaks, so the focus tube light traps are a bit over-designed.

    Click image for larger version. 

Name:	Screenshot 2021-12-17 094912.png 
Views:	55 
Size:	86.9 KB 
ID:	222521

    Camera has worked out really well.. it's really light weight compared to my other 4x5s.

  5. #15

    Join Date
    May 2019
    Location
    Stockholm, Sweden
    Posts
    322

    Re: Show your 3D printed LF photography related thing

    Quote Originally Posted by djphoto View Post
    Here's my 3d printed 4x5 camera, designed in fusion 360. Mated to a graflock back, 120 roll adapter (6x6,6x9 or 6x12), but I can also attach a graflex ground glass for shooting 4x5.

    Distance scale or groundglass focusing.

    I'm paranoid of light leaks, so the focus tube light traps are a bit over-designed.

    Camera has worked out really well.. it's really light weight compared to my other 4x5s.
    Looks really nice. One day I'll try to do the same in Fusion. But being a beginner I'm not really there yet (big understatement).
    Just did my first Fusion project. A storagebox for my large format lenses. to go in my backpack.

    Click image for larger version. 

Name:	IMG_7401.jpg 
Views:	39 
Size:	68.9 KB 
ID:	222552 Click image for larger version. 

Name:	IMG_7402.jpg 
Views:	47 
Size:	78.9 KB 
ID:	222553 Click image for larger version. 

Name:	IMG_7403.jpg 
Views:	37 
Size:	66.0 KB 
ID:	222554

    Easily adjusted for different sizes. Ventilated and stackable with snap on lid. Beginner stuff but fun to do.

  6. #16

    Join Date
    Jan 2022
    Location
    St Louis MO
    Posts
    8

    Re: Show your 3D printed LF photography related thing

    Just designed and printed some lens boards for the Sinar (and also Horseman L45) system. These are the 140mm lens boards. I haven't seen any other ones on the internet so I had to design them myself. They seem to work pretty well and are very solid if following my instructions.

    https://www.thingiverse.com/thing:5196070

    https://drive.google.com/file/d/1uzD...ew?usp=sharing
    Last edited by linuxid10t; 11-Jan-2022 at 14:04.

  7. #17

    Join Date
    Mar 2016
    Location
    Seoul
    Posts
    202

    Re: Show your 3D printed LF photography related thing

    Quote Originally Posted by djphoto View Post
    Here's my 3d printed 4x5 camera, designed in fusion 360. Mated to a graflock back, 120 roll adapter (6x6,6x9 or 6x12), but I can also attach a graflex ground glass for shooting 4x5.

    Distance scale or groundglass focusing.

    Click image for larger version. 

Name:	20211217_093554.jpg 
Views:	58 
Size:	27.1 KB 
ID:	222518
    Click image for larger version. 

Name:	20211217_093627.jpg 
Views:	67 
Size:	23.2 KB 
ID:	222519
    Click image for larger version. 

Name:	20211217_093611.jpg 
Views:	51 
Size:	28.7 KB 
ID:	222520

    I'm paranoid of light leaks, so the focus tube light traps are a bit over-designed.

    Click image for larger version. 

Name:	Screenshot 2021-12-17 094912.png 
Views:	55 
Size:	86.9 KB 
ID:	222521

    Camera has worked out really well.. it's really light weight compared to my other 4x5s.
    Impressive, how much does the camera weigh (with lens)?

  8. #18

    Join Date
    Jul 2014
    Posts
    86

    Re: Show your 3D printed LF photography related thing

    The 3-D printed cameras here look somewhat more sleek than the Cameradactyl OG. But his does have interchangeable nose cones for various lenses.
    I also already have a Travelwide but my focusing never worked from day one. Thought I could fix it myself, finally gave up and the body now has a hacked lens from a 6x9 folder. It will cover 4x4 (133mm diagonal) so the camera is masked to that size.
    Can also use a 130mm f7.7 from another Kodak folder. That one will cover 4x5 and the front element focusing obviates the need for a separate helical.

  9. #19
    Nodda Duma's Avatar
    Join Date
    Nov 2014
    Location
    Brookline, NH
    Posts
    1,071

    Re: Show your 3D printed LF photography related thing

    I converted a scan of a dry plate into an STL file and printed it out. The thickness was a function of grayscale. Here is the result.

    Click image for larger version. 

Name:	1319BB6B-07FC-4A80-A99E-33E657239F9B.jpg 
Views:	39 
Size:	70.1 KB 
ID:	223546

    Click image for larger version. 

Name:	DE660491-BFA3-476F-A239-106D1EE892AC.jpg 
Views:	40 
Size:	63.0 KB 
ID:	223547
    Newly made large format dry plates available! Look:
    https://www.pictoriographica.com

  10. #20
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    18,006

    Re: Show your 3D printed LF photography related thing

    The path to a future

    Quote Originally Posted by Nodda Duma View Post
    I converted a scan of a dry plate into an STL file and printed it out. The thickness was a function of grayscale. Here is the result.

    Click image for larger version. 

Name:	1319BB6B-07FC-4A80-A99E-33E657239F9B.jpg 
Views:	39 
Size:	70.1 KB 
ID:	223546

    Click image for larger version. 

Name:	DE660491-BFA3-476F-A239-106D1EE892AC.jpg 
Views:	40 
Size:	63.0 KB 
ID:	223547

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •