G'Day All
does anyone know of a source for a 5x7 Elwood enlarger lens board.
Thanks
Michael
G'Day All
does anyone know of a source for a 5x7 Elwood enlarger lens board.
Thanks
Michael
You might try Ebay seller zbima1.
They are wooden and should be simpler to make than camera lens boards.
Sent from my iPad using Tapatalk
...Dilettante! Who you calling a Dilettante?
Perhaps you are from the Underworld from your greeting
Shipping is alway way too high to there
I suggest you make one from a sandwich with thin plywood, maybe 3 glue-up
My dimensions are
0.4" thick
Lip 0.15" X 0.25"
5.25 wide X 6.75" long including Lip
All dims can vary a bit, whittle it down to size
5-7 OR 8-10 Elwood Lens Board 2 by TIN CAN COLLEGE, on Flickr
5-7 OR 8-10 Elwood Lens Board 1 by TIN CAN COLLEGE, on Flickr
Good Day
Tin Can
I remember making on on a table saw with a dato blade to cut the rebate.
A little crude, but in keeping with the robust and simple nature of my 5x7 Elwood enlarger itself.
They are not hard to make. Find the right thickness of plywood or MDF. It is about 3/8" . Cut a rebate or rabbet at one end, drill a hole the right size and there you are.
Thank You Everyone. I will endeavor to make up a couple this weekend.
Thanks guys ,I made up one this weekend
Bookmarks