I’m now preparing for mounting a barrel lens on my arca swiss metric.
Just for sharing, I bought the following adapters made by a Chinese manufacturer called Luland on ebay.
Luland Produced Arca Swiss 141mm to SINAR Shutter Adapter Plate
https://www.ebay.com/itm/Luland-Prod...QAAOSwhvFZCaif
Luland Arca Swiss 171mm to Arca Swiss 141mm Lens board adapter
https://www.ebay.com/itm/Luland-Arca...UAAOSwWI1eB0vx
My standard is the older 171mm, so I needed the adapter of 171mm to 141mm standard.
You don’t need it if you have the current 141mm standard.
I fitted all the parts. Overall, everything is fine except the extra space between the sinar copal shutter and the shutter adapter.
I need to tape the adapter rim(the rightmost pic in the first reply) to thicken the notch of the sinar copal shutter, otherwise the shutter and the lens tilt downward a little bit, then the focal plane isn’t parallel to the film plane.
I will post the lens mounted on the camera when I receive the TTH series IIe cooke f4.5 325mm lens.
If you mount a sinar copal shutter on arca cameras by any other means, let me know just for my interest.
Bookmarks