Originally Posted by
Alan9940
If you don't mind sharing, how do you agitate with the hangers? I've tried just about every technique I've read about and never been totally successful. The closet I came to success was lift/tilt left, lift/tilt right. However, if I'm not real smooth (and real slow) when dropping the hanger back into the developer, I'll get slight surge marks from the developer "spurting" up through the holes in the bottom trough (8x10). Didn't have this issue with 4-up 4x5 because the drain holes are on the sides. Also, I've seen a slight density change along random edges of the film.
Any tips, tricks, insight you'd care to share would be greatly appreciated. Thank you.
Alan
Bookmarks