Originally Posted by
Corran
I can only speak for myself here, which may not apply to your situation.
I use a big piece of ANR plexiglass with metal handles on the edge to weigh down the negative and paper. Since there's no lip or edge, I can align the paper and negative easily. Back when I started doing contact prints, I just used 16x20 paper or 20x24 paper cut in half for 8x20 and 12x20 prints exactly. I could tell in the darkroom if the paper / negative was misaligned.
That said, lately I've used 20x24 paper cut down to about 14x24 for contact prints, giving me a bit more wiggle room both for the print and for mounting with the edges showing (about 13x21). I can use the strip I cut off for test strips.
However I am experimenting with photo corners for mounting to foam board as a different way of presentation, so might go back to the exact print size method.
Nice print btw.
Bookmarks