Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Flying with 8x10 within the U.S.

  1. #1

    Join Date
    Nov 2004
    Location
    Orange, CA
    Posts
    973

    Flying with 8x10 within the U.S.

    For those of you traveling via airplane with your 8x10 kit, how do you go about it? For me, flying with 4x5 is easy (the camera kit and film fits into a carry-on sized backpack, and the tripod is stored in checked baggage), but 8x10 seems to pose some quandaries. I initially thought I would check-in my Lowepro Super Trekker (containing my entire camera kit except for film, holders and ground glass) and a large rolling suitcase (containing tripod, changing tent, empty film holders as well as personal items), and carry-on a large attaché case containing film and ground glass. However, what's to stop one of the airline workers from strapping on my camera backpack and making off with virtually my entire beloved 8x10 kit?

    So far, have any of you had any problems with airport theft of checked camera equipment? Is there a less harrowing way to go about this?

    I'd prefer to avoid separately sending equipment ahead of my arrival, as this poses other difficulties.

    Thanks!

  2. #2
    Whatever David A. Goldfarb's Avatar
    Join Date
    Mar 2000
    Location
    Honolulu, Hawai'i
    Posts
    4,658

    Flying with 8x10 within the U.S.

    My 8x10" Gowland fits in a knapsack for laptop computers. The camera, lenses, most accessories, and film go in the knapsack, which I carry on the plane. Tripod goes in my Tenba TTP case with the head attached, handles removed and put in the side pocket. I have room for other things in the TTP case, so I often put clothing, darkcloth or other items in it. Filmholders and empty film boxes go checked in my suitcase--a maximum carryon type rolling case. Lately, I've made a little case for each of the cameras that I travel with containing items that seem to attract the attention of airport screeners, because they look like something dangerous--cable releases, Linhof rangefinder cams, and small tools and screwdrivers, and I put it in my checked luggage. I let my knapsack with film go through the X-ray, and more often then not, they let my camera through without asking for a hand inspection, and I haven't had trouble with fog from X-rays.

  3. #3

    Join Date
    Jul 2001
    Location
    San Francisco, CA
    Posts
    715

    Flying with 8x10 within the U.S.

    I have had no trouble carrying on a Canham 8x10 in a Lowepro Photo Trekker AW with the camera, 4 lenses, darkcloth and small items. I carry on 6 film holders and a box of film in a book bag. I check the tripod and a changing tent in my duffle. This set up has worked for me on 4 or 5 cross country trips in the last few years.

    I'm not sure but the Super Trekker may be too big for the overhead bins.

    Good luck.

  4. #4

    Flying with 8x10 within the U.S.

    What are the maximun dimensions & weight for carry-on luggage on US internal flights?

  5. #5

    Join Date
    Nov 2004
    Location
    Orange, CA
    Posts
    973

    Flying with 8x10 within the U.S.


  6. #6

    Flying with 8x10 within the U.S.

    As it so happens, I am on my annual vacation visiting family in South Africa and have brought an 8x10 with me (I travel everywhere with a 4x5, lenses and Mamiya 7 outfit in a Lowepro Commercial as carryon. For this trip, I bought a Pelican case which generously accomodates my 8X10 - custom fitted the camera with the very convenient supplied foam and then put the Pelican (I think it's a 1650...) into an old suitcase with some other things and checked it. Empty 8x10 holders went in the middle of my other checked baggage. I carried all the lenses I needed as well as the Mamiya 7 outfit and a Rolleiflex in the Lowepro commercial and all my film in an extra cooler bag (which is just about the right size for two bottles of wine) which my daughter lugged around. The Pelican solution seems to work just fine...

  7. #7

    Flying with 8x10 within the U.S.

    While I haven't tried travelling with it yet (I haven't been doing much flying lately), I recently took my 4x5 out of my Photo Trekker AW and shoehorned in my Zone VI 8x10. It gets a tad crowded with three lenses, filter kit and such, and I'm limited to about three film holders - but it's loads lighter than the Super Trekker was, and I know from travelling with the 4x5 that it fits as a carry-on. Barely, but so long as it makes it, who cares about room to spare?

  8. #8

    Join Date
    Jun 2002
    Posts
    9,487

    Flying with 8x10 within the U.S.

    I plan on using my Lightware 1629 to check my 8x10 Arca through, with lens, holders and changing bag all aboard. Laptop, DSLR and lenses, and boxes of film go into the carry-on backpack. Tripod goes into either my suitcase or I'll put my suitcase into a Lightware 34 x 12 x12 cargo case.

    I used to check my 4x5 monorail with lenses in a Tenba or Lightware View Camera Case - never a problem and you can bring everything - very nice to work out of the car with as you can leave the monorail assembled.

    Don't be afraid to check if you have proper bags and time between flights. Bags thend to get lost during short connections.

  9. #9

    Join Date
    Dec 2001
    Location
    San Joaquin Valley, California
    Posts
    9,603

    Flying with 8x10 within the U.S.

    I always stuff a clean shirt, swimming trunks and toilet kit with my meds in my carry on. You never know when you're going to get stuck someplace and at least I'll have my pills, razor, and toothbrush with me, a clean shirt to go out to dinner in, and most hotels and motels have a pool so I can go swimming while thinking about what to do next. Theres plenty of room in my Lowe AW for that stuff.
    "I would feel more optimistic about a bright future for man if he spent less time proving that he can outwit Nature and more time tasting her sweetness and respecting her seniority"---EB White

  10. #10

    Join Date
    Mar 2004
    Location
    San Francisco
    Posts
    628

    Re: Flying with 8x10 within the U.S.

    DavidG,

    If you are still listening, would you mind saying what brand of knapsack you use with your Gowland 8x10? I just got one and it doesn't fit in my f.64 backpack, so I am shopping for a new pack. I have the All Moves with reversible back, so, with knobs, it is on the order of 16"x17". Any pack that is designed for a 17" pc obviously will address one of the dimensions, but most are too narrow in the other dimension. Thanks.

Similar Threads

  1. Flying US to Italy
    By Saulius in forum Location & Travel
    Replies: 7
    Last Post: 17-May-2006, 13:09
  2. Seiko shutters - and that "flying" arm...
    By Christopher Perez in forum Lenses & Lens Accessories
    Replies: 16
    Last Post: 16-Dec-2005, 22:04
  3. Flying with Arca Swiss Discovery and Gitzo 1325
    By John Hollenberg in forum Location & Travel
    Replies: 11
    Last Post: 11-Oct-2004, 19:07
  4. Good tripod bag for flying?
    By Tom Westbrook in forum Gear
    Replies: 11
    Last Post: 12-Oct-2003, 12:07
  5. Linhof 8x10 GTL or Horseman 8x10 LX-C or Arca 8x10 M-line?
    By Roger Urban in forum Cameras & Camera Accessories
    Replies: 1
    Last Post: 14-Oct-2001, 14:42

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •