"Better get looking for some bellows". Found some!
Well, it didn't take much looking, just a quiet cogitation with a brew. The bellows are right there!
He's my plan: pick up the new lamp house, condenser et al and turn it upside down.
I converted the 54 to LED and to be honest it's got too many lumen, but the same would be fine if going larger in terms of neg and print size, so:
I'll go with Randy's suggestion, make the base board; then I'll take out the condenser lens, attach what was the lamphouse stage (and will now be the lens stage) to the lens stage adjuster, and attach the condenser stage (which will now be the lamphouse) to the lamphouse adjuster and voila!
I'll start a thread on the DIY section for this build.
Bookmarks