Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 50

Thread: Best process for drying negatives after development?

  1. #31

    Join Date
    Jul 2017
    Location
    Morgan Hill, CA, USA
    Posts
    56

    Re: Best process for drying negatives after development?

    YouTube and various posts on the internet.

    Regards,
    Joshua Pheneger

  2. #32

    Join Date
    Jul 2008
    Posts
    3,901

    Re: Best process for drying negatives after development?

    Do not believe what is posted on youtube or internet until it can be check out and verify the info before acting on it.

    There are many GOOD books from the zenith of the film era on proven darkroom practices available. Consume and consider information from these sources first as there is a greater possibility this information can be helpful rather than an opinion by anyone who can broadcast their ideas and opinions on the internet.


    Bernice


    Quote Originally Posted by jpheneger View Post
    YouTube and various posts on the internet.

    Regards,
    Joshua Pheneger

  3. #33
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,518

    Re: Best process for drying negatives after development?

    When my fingers were baby soft, I would squeegee 35mm film between my first 2 fingers. Not a problem. Made it fry faster.

    Actual squeegees were a big problem.

    LF does not need it, my films sheet off water well with filtered Chicago Lake Michigan water. Here the water is way different. So far so good. TBD
    Tin Can

  4. #34

    Join Date
    Jun 2014
    Posts
    2,084

    Re: Best process for drying negatives after development?

    Quote Originally Posted by Bernice Loui View Post
    Curious, were did the idea of using a squeegee on wet film come from?


    Bernice
    I believe that in their recent beginner's video on film development, Ilford themselves actually showed the use of a squeegee on wet film. I found that highly remarkable and quite risky.

  5. #35

    Join Date
    Jul 2006
    Location
    Collinsville, CT USA
    Posts
    2,332

    Re: Best process for drying negatives after development?

    Last bath is PhotoFlo 1:200 made with distilled water. I let the films soak for a full 2 minutes with minimal agitation. Never had problems using a Patterson squeegee which was also soaked in PhotoFlo 1:200. But when I started to shoot 11x14, it would take 4 swipes to squeegee to clean the negative so just started to hang up the negatives without squeegeeing them.

  6. #36

    Join Date
    Dec 2011
    Location
    New Delhi India
    Posts
    93

    Re: Best process for drying negatives after development?

    Quote Originally Posted by Oren Grad View Post
    I don't squeegee film, ever - I'm not willing to take the risk of damage.

    I dunk each sheet film negative in Photo-Flo 200 diluted 1+300, then hang it up by the corner to dry. Before I leave the darkroom after hanging up the negatives and cleaning up, I take a paper towel and gently touch the corner of each hanging negative to absorb the bead of Photo-Flo/water that has accumulated in the lower corner of the negative up to that point; this prevents getting Photo-Flo/water spot residue in the corner of the negative.

    The clips I use do leave "tooth marks" in the far corner of the negative, generally outside of the exposed area. It doesn't bother me.
    As you suspected, those lines are definitely digital. Far too even to be anything analogue.

  7. #37
    Maris Rusis's Avatar
    Join Date
    May 2006
    Location
    Noosa, Australia.
    Posts
    1,215

    Re: Best process for drying negatives after development?

    Film hanging on the diagonal after Photo-Flo treatment. The surgical forceps grip a tiny piece of the corner well outside the picture area. These forceps are made for real surgery and they never let go either to drop a film or to slip off an artery.
    Photography:first utterance. Sir John Herschel, 14 March 1839 at the Royal Society. "...Photography or the application of the Chemical rays of light to the purpose of pictorial representation,..".

  8. #38
    45-57-617
    Join Date
    Oct 2006
    Location
    Toowoomba, Queensland
    Posts
    645

    Re: Best process for drying negatives after development?

    Hi,

    I use an underwear hanger. I purchased mine from Ikea for not much like about 5$ or 8$. The advantage is that the springs are not very powerful so as to not harm lingerie and the pegs are plastic. Mine is a friendly octopus design !
    Attached Thumbnails Attached Thumbnails IMAG0584.jpg  

  9. #39

    Join Date
    Dec 2013
    Posts
    49

    Re: Best process for drying negatives after development?

    I use one of those underwear hangers as well. Very compact and the plastic clips grip fine.

  10. #40

    Join Date
    Jul 2017
    Location
    Morgan Hill, CA, USA
    Posts
    56

    Re: Best process for drying negatives after development?

    I need an octopus!

Similar Threads

  1. Is it OK to quickly dip my 4x5 negatives into alcohol to expedite drying?
    By AtlantaTerry in forum Darkroom: Film, Processing & Printing
    Replies: 40
    Last Post: 20-Sep-2013, 10:34
  2. Drying negatives
    By codyjgraham in forum Style & Technique
    Replies: 15
    Last Post: 25-Jul-2012, 12:42
  3. Drying Large Negatives
    By William Whitaker in forum Darkroom: Film, Processing & Printing
    Replies: 24
    Last Post: 18-Jul-2012, 12:54
  4. Which film development process is best
    By Scott Walker in forum Darkroom: Film, Processing & Printing
    Replies: 16
    Last Post: 16-Oct-2011, 08:12
  5. Film for Pyro Development for Alt Process
    By alec4444 in forum Darkroom: Film, Processing & Printing
    Replies: 28
    Last Post: 30-Dec-2007, 15:34

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •