New Dry Plate made in China

[pierre506]

8x10 reversed B & W
1st developer: d 94
2nd developer: d 72
Cellphone shooted the image result~



通过我的 SCH-I959 上的 Tapatalk发言

[Tin Can]

Very interesting process.

I assume DIY emulsion?

And nice image!

[pierre506]

Dear Randy, it's not a DIYed emulsion.
It's a production line. The line came from the UK. So, the original sizes were 912 and 18x24.
I just got the 8x10 testing samples.
I will get new 912 samples and new holders for 912 and 8x10 soon.

通过我的 SCH-I959 上的 Tapatalk发言

[IanG]

Tell us more about where the coating line came from in the UK, and when.

Many of us in the UK have seen the Ilford plate line demonstrated on factory tours. The line itself is not that sophisticated - it doesn't need to be, but the coating head is.

Ian

[goamules]

Good job, glad to see you trying this uncommon process!

[Kevin Harding]

Well, this is interesting! Will the plates and holders be commercially available?

Envoyé de mon HTC One_M8 en utilisant Tapatalk

[pierre506]

Tell us more about where the coating line came from in the UK, and when.

Many of us in the UK have seen the Ilford plate line demonstrated on factory tours. The line itself is not that sophisticated - it doesn't need to be, but the coating head is.

Ian

The coating line is in Tianjin, China.
It mainly produced X-ray plates for industrial metal detection of the flaws. It also produced the dry plates.

通过我的 SCH-I959 上的 Tapatalk发言

[pierre506]

Well, this is interesting! Will the plates and holders be commercially available?

Envoyé de mon HTC One_M8 en utilisant Tapatalk

Dear Kevin, I believe the coating line owner would let the dry plates and holders commercially. He is a photographer, too. That's why he had to produce the holders same time because the dry plate photography needs more holders than the Wet plate Collodion activities.
He also bring the dry plates to pass the Metro, train and airport X-ray checking. The results are positive. The international logistics are no problem, too.
Hoping to see the good result in the near future.

Well, this is interesting! Will the plates and holders be commercially available?

Envoyé de mon HTC One_M8 en utilisant Tapatalk

Dear Kevin, I believe the coating line owner would let the dry plates and holders commercially. He is a photographer, too. That's why he had to produce the holders same time because the dry plate photography needs more holders than the Wet plate Collodion activities.
He also


通过我的 SCH-I959 上的 Tapatalk发言

[Tin Can]

Dear Randy, it's not a DIYed emulsion.
It's a production line. The line came from the UK. So, the original sizes were 912 and 18x24.
I just got the 8x10 testing samples.
I will get new 912 samples and new holders for 912 and 8x10 soon.

通过我的 SCH-I959 上的 Tapatalk发言

8x10 is good size!

My plate holders are 5x7...

[pierre506]

Yes, I suggested him to make 5x7 plates and holders although 5x7 has less users.
We also can book larger plates than 8x10 sizes.

通过我的 SCH-I959 上的 Tapatalk发言