Results 1 to 9 of 9

Thread: understanding dektol dilution

  1. #1

    Join Date
    Dec 2004
    Location
    Pennsylvania
    Posts
    287

    understanding dektol dilution

    i recently got a powder pack of dektol, that is meant to make 1 gallon. i mixed up the whole packet to make one gallon. i'm confused here. should i be diluting this mixure further to 1:2, or have i already mixed this 1:2? i'm confused.

  2. #2

    understanding dektol dilution

    You made the "stock solution". Mix one part of the stock solution with two parts of water to make your "working solution". Store the stock solution in an airtight container (with as little air as possible). Make enough working solution for one printing session, then discard.

  3. #3

    Join Date
    Oct 2003
    Location
    Westport Island, Maine
    Posts
    1,236

    understanding dektol dilution

    You can decant your Stock solution into 16 or 20 oz. plastic soft drink or water bottles. Fill them full - no air - and the Dektol won't oxidize and will last a long, long time. Use 1 bottle of developer with 2 bottles of water for the Working solution.
    Bruce Barlow
    author of "Finely Focused" and "Exercises in Photographic Composition"
    www.brucewbarlow.com

  4. #4

    Join Date
    Sep 2003
    Location
    Santa Cruz
    Posts
    147

    understanding dektol dilution

    If you have kids, NEVER place any chemicals into a soft drink or water bottle.

  5. #5
    Donald Qualls's Avatar
    Join Date
    Oct 2004
    Location
    North Carolina
    Posts
    1,092

    understanding dektol dilution

    Absolutely right -- at the very least, any bottle to be reused for chemical storage should have the original label removed and be spray painted, dyed, or otherwise altered so it doesn't look like the ones that contain drinkables. Better would be to buy Boston Rounds bottles -- dark glass with cone-seal caps that are really airtight -- and label them properly as to contents, including a skull-and-bones and/or Mr. Yuck symbol to make it really clear this is not for drinking.
    If a contact print at arm's length is too small to see, you need a bigger camera. :D

  6. #6
    おせわに なります! Andrew O'Neill's Avatar
    Join Date
    Sep 2003
    Location
    Coquitlam, BC, Canada, eh!
    Posts
    5,150

    understanding dektol dilution

    ...or you can dilute the stock to 1+3 from the standard 1+2, and extend the development time to 3 minutes. Economical, and can sometimes bring out more detail in very light tonal areas.

  7. #7

    Join Date
    Feb 2004
    Location
    Albuquerque, NM
    Posts
    136

    understanding dektol dilution

    I always like using the 1 quart size and mixing it 1:3. That way it gave me 1 gallon of working solution that was just right for my 12x16 trays. Even AA used 1:3 sometimes.

  8. #8

    understanding dektol dilution

    Brian, Kodak no longer makes Dektol in Quart sizes. They only make 1 Gallon sizes. Recently someone recommended mixing up the Gallon of Dekol, then storing the Dektol in a number of 16 ounce bottles. When needed, just pour one of the bottles in a tray and add two more bottles of water to get the 1 to 2 dilution. This is one of the best ideas ever. It helps get maximum storage out of your Dektol stock solution and makes mixing just that more simple.

  9. #9

    Join Date
    Mar 2013
    Posts
    6

    Re: understanding dektol dilution

    Hello,
    I've just finished building a home made box camera with which I want to travel around China taking picures or people I like for pleasure, and of tourist to make a living. I wanted to use Rodinal because it lasts for a very long time and it's very easy to use, but only found Dektol in the store and I have never used it.
    My problem is that travelling with 5l of stock solution is not an option, I have not found any information about if I can mix only a small portion of the pouder and then close carefully the rest. The only similar information I found is a very categorical "mix immediately after opening" in Ilford's website concerning one of Ilford's pouders, but I don't know if it is the same for any pouder or if they might exagerate a little.
    Any of you have tried not to mix all the pouder imediately but doing so after some months?

    Thank you very much!

    Jorge

Similar Threads

  1. Understanding Toes and Shoulders.. not my curves!
    By brian steinberger in forum Darkroom: Film, Processing & Printing
    Replies: 13
    Last Post: 8-Dec-2005, 22:24
  2. Dektol Dilution
    By brian steinberger in forum Darkroom: Film, Processing & Printing
    Replies: 10
    Last Post: 28-Aug-2005, 19:47
  3. Understanding TMAX RS
    By brian steinberger in forum Darkroom: Film, Processing & Printing
    Replies: 10
    Last Post: 9-Feb-2005, 16:46
  4. Understanding camera prices?
    By Calamity Jane in forum Cameras & Camera Accessories
    Replies: 15
    Last Post: 10-Dec-2004, 14:06
  5. Understanding rear tilt/shift
    By Philippe Gauthier in forum Style & Technique
    Replies: 6
    Last Post: 1-Oct-2004, 07:26

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •