8x10 or 5x7

[Percy]

Hi.

Anybody know where I can purchase an 8x10 or 5x7 camera, normal lens and film holders without ransoming the queen?

[Gem Singer]

From a person who sells photo gear?---- Is this a trick question?

[John Kasaian]

percy,

Unless you really luck out plan on spending at least $900 for a used 8x10 kit. You can do a wee bit better going the 5x7 route as many old wood flatbed 4x5s will accept 5x7 backs---also usable 5x7 flavored tripods, lenses and film holders will cost slilghtly less bucks than their 8x10 bretheren. If your a gamblin' sort Ebay has lots to offer. If you want a sure bet go with Midwest Photographic, Igor's or one of the other establishments that come highly recommended.

[Vick Vickery]

About the best bet for low-cost LF equipment seems to be e-bay and lots of patience...you often have to bid the most you are willing to pay on several items before you get one, but that way you can end up with a satisfactory camera at a price you dicide on. I bid on several view cameras without winning one before I won my current Cambo at about 1/2 of what I expected to pay. My normal stratagy is to enter my maximum bid and then forget about the item until it closes; then I look to see if I won it...often I do. I know alot of folks have ended up feeling taken on e-bay, but I have been very lucky...I've bought alot of camera stuff and only been sent one item that was not as described (a 3x3 gel filter that wasn't 3x3...it had 1/2" cut from one corner, leaving the maximum usable area 2.5x2.5 and off-centered). It was such a low-costl item that I didn't argue when the seller didn't want to make it good, but I did leave him negative feedback so that other buyers would be wary of him and reported to e-bay that he tried to SELL me a replacement. Good luck.

[Nick_3536]

I picked up an Ansco 5x7 plus 4 film holders and a case for $127. It wasn't perfect. The bellows had been cut down to 16" I think. The rear track was missing which didn't matter with the cut down bellows. The back I think was really a 2.5x7 spilt back that had been changed back to 5x7. Still it was only $127 for a camera and when I added by 150mm G-claron it worked just fine.

I picked up an 8x10 Cambo super monorail for $225 or so. Both tripod mounts needed tightening. I really should replace the screws. The ground glass is from a B&J camera and isn't in the best shape. it weighs a good 15lbs+. But when I add my 240 G-claron it works just fine. I picked up four 8x10 holders for about $85 US including shipping for the set.

Neither of those cameras are perfect. Both still needed tripods. I had to buy some 8x10 holders.

I've seen 8x10s go for less but they had more obvious problems.

I'm not sure how much more I would have spent for "perfect". The tachihara 8x10 from Mpex isn't that much more money then many of the pristine cameras sell for. My Shen Hao 5x7 with all the bits wasn't too extreme. So for me the choice was more broken down older that I could fix up a little or brand new.

[Ben Calwell]

Try Midwest Photo (www.mpex.com). Jim at Midwest could probably help you put something together that's within your budget.

[Joe Smigiel]

I just picked up a 5x7 Ansco with 210mm tessar and packard shutter from eBay for $125 plus shipping. I only bid on the thing for the Agfa tripod and head which i figured was almost worth the $125 alone. (I'm keeping the tripod and possibly the Packard Shutter and I'll probably be either selling the camera and lens or stripping the hardware from it for some other cameras I'm constructing.)

In the past I've purchased similar tailboard Ansco 5x7s sans lens for as little as $26. I think the lowest I've ever paid for an 8x10 (Eastman Studio Camera) on eBay was $67. You just have to be patient on eBay. It also helps if you can find an individual selling camera stuff about which they have no clue and they put ridiculously low Buy-It-Now prices on. Once I see one of their auctions (even if I'm too late for that particular item), I add that seller to my favorite seller's list and check to see what they list periodically.

A few weeks ago I got a 7" Verito lens in shutter BIN for about $125 IIRC. A few days later a similar lens in barrel went for over $400. Helps to be at the right place at the right time.

[John D Gerndt]

Percy, you'll do better starting out with 5x7 by far. Everything is cheaper. It is a very respectable format, quite large enough to contact print and enlargers are more plentiful as well as more reasonable in size. Even if you get bitten by the 8x10 bug, the 5x7 will sometimes be the better choice. It is OK to have two cameras. Seriously, start with the 5x7, deal with someone of high repute. That will be your bargin.

Cheers,

[kreig]

Keep your eyes open at garage sales. I have a couple of people who go to lots of garage sales and they call me if there is something. It paid off one time, I bought my 8x10 deardorf with 3 lenses, 5 film holders, original case etc., AND a 4x5 Pluabel Makina with case, holders and 2 lenses for $450. about 3 years ago.

[martin_4668]

why settle...
Call mr Philips and have him make a customized 8x10, call a respected LF dealer and order 2-3 new Rodenstock Apo-Sironar-S, 10 toyo 8x10 holders and some trix´es, a gitzo carbon tripod with an arca B2 head and a good lightmeter....have fun, pay later