Just a follow-up message to let you know about my quest to work out the best solution for the Shen Hao 6x17 back on the Shen Hao camera. The flat lensboard and regular bellows were not allowing for ANY movements with a Super Angulon 90/8 lens. The addition of the wide angle bellows was not much of an improvement. I tracked down a Linhof recessed lens board (20mm, the deepest I could find to fit the Shen Hao camera). In conjunction with the wide angle bellows, I now have a full 3cm front rise and fall, because the front standard now clears the boxed roof of the rear standard, and plenty of movement elsewhere. I finally have a working system!
Bookmarks