Hi, I am trying to find the sizes of the front and rear lens caps for the 47mm Schneider Super Angulon XL F5.6.
Any help, appreciated.
Thanks
Hi, I am trying to find the sizes of the front and rear lens caps for the 47mm Schneider Super Angulon XL F5.6.
Any help, appreciated.
Thanks
http://www.bhphotovideo.com/c/produc...ngulon_XL.html
Tim, if you look under specs it says 54mm slip on cap for the front. It doesn't mention the rear but looking at it I wonder if there was one.
Hi Alan, thanks for the reply. I learned from a friend that the info on the B&H site is actually wrong. But thank you for the info.
Ok, I'll try again. Ken Rockwell says 70mm slip on front cap. No mention of rear cap again.
http://www.kenrockwell.com/schneider/47xl.htm
70mm front (2 3/4"), 63.5mm rear (close enough to 2 1/2"). Measure your own.
For the nth time. Tim it is a good idea to get a decent caliper, or at least a straight-edge with mm markings. They are not expensive.
.
Agreed.
Front: Ø 70mm. Rear: Ø 63.5mm.
https://www.schneideroptics.com/pdfs...xl_56_47_3.pdf
Best regards, -Tim.
Bookmarks