Gandolfi 8x10 Precision Folding Instruction and Date Questions...

[Dustyman]

Hi all. I have just received delivery of an impressively beautiful Gandolfi 8x10 Precision (Traditional) but I am having a hard time figuring out how to fold it in place. The woman who sold it to me removed the brass knobs that secured the front standard in order to fold it. I can't imagine that that would be the proper method. Can someone assist me with the correct procedure to fold it properly? Much appreciated. I will post some pix within a few days.

On another note, I would like to somehow date the camera. I have read that there should be a 2 digit number in the back to indicate the year. I don't see any 2 digit number. Just a number "1" on the inside of the camera's back, and also the same "1" inside of the 8x10 film back.

Many thanks.

[Steven Tribe]

A 1 or 2 digit number sounds unlikely: Mahogany cameras are often marked with assembly numbers on the separate pieces. that is, "these pieces matched well so we should glue these 2 (or 3 etc) together tomorrow!"

Many trad cameras "flip" so that a mounted lens ends up facing down through a hole in the base plate.

[Dustyman]

Agreed, Steve. These single digit numbers were to match parts in assembly. Unfortunately, I don't see any other numbers.

Regarding the folding problem, yes, I've tried to position the front standard lens board in and down, like my 11x14 V11 Deardorff, but as I do so the Gandolfi's tall front rise brackets tilt back, with their tops stabbing the bellows midway, preventing the camera to fold.

Any 8x10 Gandolfi users care to chime in?

[Steven Tribe]

"Gandolfi" must live up to his handle - so send him a PM. He (Emil) is often on a Prague tour at this time of the year with students so perhaps direct through through the LFPF to his email address is better? I think he has every model of Gandolfi!

There are other owners/users here - check the "gandolfi" threads.

[karl french]

As far as I recall you must undo the latches at the bottom of the front standard. Then lay the standard on the base. Then fold the back down. Sort of like a Chamonix/Philips.

[Dustyman]

That you, Karl... that was the trick! Once I disconnected the bottom of the standard I was able to lay the brass side brackets down flat, as well as the standard. Much appreciated!

[William Whitaker]

As Karl said, the latches/brackets at the bottom of the standard hold it in place.


also this


The slider moves fore and aft to alternately open or close the front or rear notch. Open the latch, lift the front standard up (knobs should be loosened, but not removed, and lay the front standard face-down flat in the bed of the camera. The rear standard focus may need to be adjusted to position the rear standard so that it clears everything on its way to the closed position. That's about all there is to it.

[Dustyman]

Will, those were amazingly helpful pictures! Super illustrative. I've had (and have) other folding field cameras, but this was the first that required this procedure. Simple enough. How do you find working with this camera? I know Gandolfi has a formidable reputation, but there is not much on the web as far as first hand experience. The camera, in lovely condition, was considerably less expensive than a Deardorff V8 in comparable condition. Additionally it came with an extra back (5x7), a bunch of both 8x10 and 5x7 holders, and a heavy duty metal flight case for all. I feel very fortunate. Deardorffs are readily available, but I hardly ever see 8x10 Gandolfi cameras for sale.

[karl french]

I saw that camera as well. I was quite tempted. Based on my current obsession with 10x12 I managed to resist. You got a very good deal. They are incredibly well made cameras. A real pleasure to use. Slightly limited compared to the Deardorff, but still a great camera.

[Dustyman]

It cleaned up beautifully with fine steel owl and beeswax. For me the nice surprise was that the extra back turned out to be 5x7 and not 4x5 as advertised. I suspected as much from the picture, was wasn't sure until it arrived today. Perfect bellows, soft and supple. Additionally the seller, who was a very sweet older woman, located a bunch of extra film holders and a few lens boards and included them. She didn't charge me shipping, and I am sure it was costly at 65lbs via UPS cross country.