Originally Posted by
R. Peters
Don't assume the infinity stops are set correctly. I've had a few graphics over the years and I never had ONE where the infinity stops were set correctly. Set it on a tripod, open the lens wide open and focus on a smoke stack, tree, or something at least 3/4 of a mile away. Then check the infinity stops. Odds are you'll have to use a jeweler's screwdriver to loosen the screws and move the infinity stops. If you need to adjust the rangefinder, there is a cam below and behind the bellows that can be set to infinity. If the rangefinder proves to be way out of adjustment, there are instructions on Graflex Org on how to adjust the Kalart Rangefinder. It isn't that difficult.
bob
Bookmarks