Hi All,
I have a Schneider Angulon 120mm lens in a Synchro-Compur #1 shutter. I'm thinking about getting a Shen-Hao, which would require a new lens board. The shutter has a locking screw which sits in a small hole in the current lens board adjacent to the main #1 size hole on the board. Do I need this locking screw? It would be easier to remove the screw from the shutter than to have to drill a second hole for the locking screw in a new lens board. IIRC, losing the locking screw will not harm the function of the shutter, but I couldn't find anything confirming that on searching the site.
Thanks! Bill
Bookmarks