I've never had problems with my unicolor processor before, but I've been working on developing a big stack of film and I've been getting marks on some sheets that seem to jive with the ribs on the inside of the tanks---one or two very narrow clear "spikes" about 1"-1-1/2" long coming from the edge of the sheet---like the emulsion is gone! I'll try to post an example later on. The only thing I
ve done differently is that the inside of the drums weren't completely dry since I didn't want to spend time letting the dry air-dry in between developing, but the tanks were rinsed with clean water in between batches. I can't imagine plain water lifting the emulsion though.
Any idea what happened? I've got 4 such marked negatives so far and I don't want to loose any more.
Bookmarks