I didn’t really notice anything printing at 11x14 or 16x20 with all the masking arms of the Femoneg engaged. Recently, however, I tested the enlarger’s horizontal projection feature. While projecting...
Type: Posts; User: mpålsson; Keyword(s):
I didn’t really notice anything printing at 11x14 or 16x20 with all the masking arms of the Femoneg engaged. Recently, however, I tested the enlarger’s horizontal projection feature. While projecting...
Hello, I have been curious about this mask that is installed under the adaptor plate that the Femoneg slides into. It has odd dimensions that don’t seem to correspond to any standard film size, and...
I have a question for anyone who owns the Super Angulon 90 XL. Does your lens have a brass shim spacer between the front group and the shutter (Copal 0)? Out of curiosity, I just checked my 90 XL and...
Thank you again for your reply!
I’m still a bit confused on one point, but I think I didn’t express myself clearly before.
A spot or incident meter is designed to measure the EV value of a...
Thank you. Please forgive me if this is a stupid question, but I’m a bit confused by one point. If my incident meter gives me a reading of, say, EV 4.2 and 1s at f/4 (or some other equivalent...
Dear Members,
I’m curious whether anyone who owns a Heiland LED coldlight has experience contact exposing film with a step wedge for BTZS densitometry testing. If so, I’d be most appreciative to...
Dear All,
Thank you for your replies. The knob in question appears identical to the one shown in IC-Racer’s picture. (See photo below.) Even though I took the entire knob mechanism off the rail,...
Dear All,
I have a 16x20 Saunders Master paper easel (the version with knobs) with a somewhat loose blade. The knob itself is firm, but the tension in the spring that holds the blade along the...
Bill, thank you so much for your insight about the ISO triangle and fluctuations in EI. I'll look into that further.
Since I'm unable to attach an Excel spreadsheet to a PM or public post, I've...
Thank you so much, Michael, for sharing this! It is very interesting to see, and I feel a bit of relief already.
Brian,
Thank you so much for your reply and offer! That's all very interesting. And may I send you a PM with the data? Is an Excel spreadsheet okay? Thank you so much again!!
Dear All,
Over the past few months, I’ve been slowly working my way through Phil Davis’s Beyond The Zone System. Recently, I’ve completed a few film density tests according to his instructions in...
Thank you! I'll try getting in touch with all of them!
I've attempted to reach out to several companies that offer custom ANR glass, including Scan Tech, Glass Dynamics, Surplus Optics, Knight Optical, and Kienzle. I would've tried Focal Point, but it...
Unfortunately, I sold off the entire system a long time ago, so I can't compare them. But from what I recall, the Beseler ANR glass was quite a bit more noticeably textured. At first glance, the...
Dear all,
I recently began printing with my new enlarger, a Durst L1200. My Femoneg has an Femogla-AN (anti-Newton) top panel and a Femogla (plain) bottom panel. The light source is a diffuse cold...
Thanks again for everyone who reached out to offer their thoughts. I wanted to follow up with how I solved the problem. It might be useful for someone facing a similar issue in the future.
For...
Thanks, Steve! I'll try this first.
No. I have pdfs of the L1200 user manual as well as the 165-page service manual for the Pictochrom/Pictograph (mechanically similar to the L1200 but with...
I recently acquired a Durst Laborator 1200 and just had the chance to set it up in my darkroom and check the alignment with a Versalab Parallel laser alignment tool. Unfortunately, both the lens and...