With the rubber plug you can drill a matching hole in whatever you have, insert the plug and tighten the wing nut expanding the rubber. Give you a custom mounting position.
Type: Posts; User: Gary Beasley; Keyword(s):
With the rubber plug you can drill a matching hole in whatever you have, insert the plug and tighten the wing nut expanding the rubber. Give you a custom mounting position.
Sent you a message the other day about the shipping quote, no answer.
I saw on aliexpress some tubes for hair removers that looks pretty close. If you could get the manufacturers site and find specs on what they have there may be a close match....
I have a 45A head with spare tubes. I wonder if the parts could be cross referenced to a similar tube. Xenon tubes are fairly simple construction so it may be possible.
Looks like it is built for shift and rise/fall movements. The bracket may simply be a place for a compendium to mount.
I like the lunar starkness to this. A lunar lander parked nearby would almost be believable!
I agree a miter box is the way to go, and a fine tooth saw to cut with. Easy to pack away when not needed. How big is the the roll? Might need a good sized saw to get a decent stroke length. Miter...
I found when doing E4 and later E6 the color developer goes to completion and I could extend the time and get richer looking color. My hand developed slides always looked better than the ones I sent...
Ive had the same thing happen with my Nikor tank. I have the metal band that restrains the negs too, no problem with the negs slipping. I finally quit using it and turned to my Jobo. Much better...
I would love to see some LF shots of the volcanic eruptions thats been going on in Iceland.
The Cherohala Skyway is another route in that area to check out. Nearby there is North River road that tracks along the North River for quite a few miles thats worth a look. That connects to River...
Rodinal typically develops film at a slight loss in film speed so some experimenting is called for to be sure you are getting what you want from it.
242065
Buddy of mine performing at local venue Mad Life with his band Cougar Town, a John Mellencamp tribute band.
Looks like its a simple comparator, with a resistor bridge. Using a reference light level you tweak the dial till the needle centers. Then later you can set it at that setting and tune the aperture...
241664
It looks like the bail was epoxied onto the remains of the original handle.
241619241618
Another native Arkansan here. Grew up in Jacksonville, retired in Marietta Ga. now. Have fun! Those digital nuggets can be fun to do infrared shots as the IR blocking on the sensor is often very...
I have one that someone built a wire bail handle for that was riveted to the edge of the darkslide. All you need is a loop you can get your finger into.
I have an Intellifaucet too. When I moved last and rebuilt my darkroom I found the mixing valves were stuck. It was very easy to disassemble and clean the mineral deposits off of the teflon seats....
In my back yard
241532
240731
I like to wander my yard in the morning and get shots of the flowers I find open and send them to my wife.
Your shot of the camera with the bellows extended show lots of cracks on the outside of the leather. Be sure to check for pinholes before putting any film through it. You can probably get replacement...
I just got through sleeving some 120 negs shot last week and was thinking of making a proof sheet so I could show my wife what we got. Then it occured to me I have a tool in my pocket to do a quick...
Negs or chromes? If negs it could be an artifact of the printing, ie dirt on glass.
237716
Yellow iris in the rain.
I use a PM2L color analyzer for metering under the enlarger. When using a box of paper for the first time I hang a Stouffer 21step transparent scale in my 4x5 carrier and make a test print on a strip...
The great thing about the cellphone camera is its with you most of the time and you can get an image quickly before the light changes. I got this one returning to the port in Miami at the end of a...
I had a 300mm lens for a while with a Copal electronic. Batteries were a pain to find so I wired a two cell aaa holder to the back of the lens board and ran it with that. Never had a problem with it.
It takes me a long time to use up a gallon jug of Permawash concentrate. I recently needed more and found it on Amazon of all places.
An interesting find at Old Car City, White Ga. Ebony 4x5 150mm Nikon lens.
Film scan of Tmax100 developed in Rodinal 1:25 rotary processed in a Jobo.
Makes me wonder about the hanger clips. Are they holding chemicals between baths? Maybe the frame type hangers that dont clip the film will do better.
A little world unto itself!
Theres an older fort to check out as well. Last I was there they had cannon firings regularly.
https://www.chsgeorgia.org/OFJ
I like how well you got the tonal separation in this image. Not always easy to do that.
Great find Austin, wish I could find that kind of scenery here in Georgia.
A clear lacquer sprayed on, then a light sanding to remove the raised grain and another coat will give a smooth surface that can be wiped down without shredding the paper towel. Lacquer dries fast...
The cold cathode back was probably for copying transparencies, though it would work in a limited fashion as an enlarger.
Going to put a coat of paint inside to keep the dust down?
You may have seen news on Carlsbad Caverns park having flash flooding. I found a youtube video showing the flash flood firsthand as it hit the roads leading in to the park....