I'm getting some answers. I checked the shutter speed with an Iphone app with an optical adapter. 1/25 on the ilex lens was actually 1/5 and the compur shutter 1/9 second. A scenario ripe for over...
Type: Posts; User: morecfm; Keyword(s):
I'm getting some answers. I checked the shutter speed with an Iphone app with an optical adapter. 1/25 on the ilex lens was actually 1/5 and the compur shutter 1/9 second. A scenario ripe for over...
Thanks. This will give me a place to start over again. This is information I am looking for.
I'll check the shutter and verify. I am going to do some more experimenting at different film speed "ratings" and compare against "sunny 16" Just checked my notes exposure was f/16 at 1/25 second. ...
I believe the film is green. Here's a scan of one of the negatives.226227
Photo of film hanging from drying: 226228
Photo of film with back light: 226229
Again first time using this...
Hello: I've kind of been lurking on this thread. I'm a first-time user of Fujifilm HR-U which also is my first time in 8x10 and tray developing. From previous reading elsewhere, I rated the film...
I've had this Agfa Ansco 8x10 "kit" for a while and now I'm committed to getting it ready. I have the hide glue so I'm ready to reassemble the camera. 218609
It will be scanning or contact...
At the Battle of Selma Civil War battle reenactment. Zeiss Ikon Nettar 6x6 folding camera (zone focus) 215808215809
I have a travel trailer towed by a pickup. My parents had an RV (commercial Ford Chassis?) that my brother borrowed and had a front bearing seize on the spindle in the middle of Nebraska. that...
this occurred during development with negatives stuck together.
Negative bowed in Yankee tank against another negative. What could have been because the rest of the negative looks good to me.
I dragged my Horseman HF in addition to my <ahem, digital gear> to...
Finally in business.
207263
207264
207265
This may work. It can go where wheels can't.
205150
https://www.graflex.org/
enjoy. Lots of information in the main site and the forum.
A window unit is something else I've considered, but good old electric resistive heat costs can add up rather quickly and window units can be quite noisy. If we had gas service, then I'd be set as I...
203693
Mine's under development. (pun somewhat intended) It's in a detached building with water and power.
I got the space approved by the facilities manager and some funding approved by...
Your darkroom is looking good and is providing inspiration.
I'm planning a darkroom in an outbuilding that has power and water that the facilities manager has allowed with a limited budget from...
Could you store the smaller, more sensitive components in a conditioned space? Thanks for the reminder. I have a couple of enlargers in an unconditioned room destined to become conditioned and...
Looks really nice. I think I may need to make a plywood sink because I haven't been able to locate anything near me. Any secrets that will keep me from making a mistake?
I participated in a workshop put on by John in the spring nearly two years ago at the Little River Canyon and Little River Falls in DeKalb County. It's a beautiful area and I learned from the...
On my Horseman HF, i have a 135 mm on a no. 0 shutter that folds up. A old 90 mm (f 6.8?) Wollensak lens also folds up. Nothing on a #1 shutter will fold up. Only the smallest lenses.
Just put into a water tight container and toss it into the Mississippi River. It'll eventually make it there. :rolleyes: ;)
With the print head over 40% of the cost of a new printer, I'd go with the new printer. The Pixma Pro 10 uses pigment ink which I understand is more prone to clogging than dye based inks with...
I need to remember this! Now I need a bigger bag.
I've installed a mini-split heat pump system in an upstairs addition that was previously serviced by a window type air conditioner. Most conventional air conditioners cycle on and off at full...
I have an old Wollensak (optar?) 90mm f/6.8 that folds up nicely in my HF as well as a Steinheil 135mm in a compur shutter which folds up nicely inside.
For portrait orientation, as mentioned,...
Born anno Domini 1960 which makes me 59 later this year
Typical seller disclaimer: "...should not affect image quality"
I had an Ilex 12" in a #4 shutter that had jammed threads. It appeared that I had galling between the lens cell threads and the shutter threads. I'm not sure of the material of the two components,...
Just be careful when you release the lock on the vertical shaft and keep your head back from it when doing so. It has enough punch to knock out a heavyweight fighter.
Film is sensitive to red light and you're exposing the film while developing it. It must be developed in total darkness. Safelight is for paper which is not sensitive to red light. At least you...
If Fisher Price made a view camera, this would be it.
This is encouraging. I need a blade for a #4 ilex shutter and you've provided a solution. I'll need to give it a shot.
can the seller measure the opening where the opening where the film holder goes. That'll give a good idea of the format the camera handles.
Yes! This is a great, innovative project.
I started with 4x5 and now have a lightweight Horseman field camera. I just got an 8x10 that needs some work. My opinion is to start out with 4x5 and when you get comfortable and want to go to 8x10...
It appears all the glue joints on the rear base are loose so all previously glued surfaces will be accessible for cleaning.
I'll be disassembling, cleaning, gluing and reassembling anyway. No...
Michael, it's folks like you taking your expertise to these historic sites to accomplish projects like you've involved yourself in. Your efforts will help people see what some aspects of ship's life...
Thanks for the info. Well I'm off to order some hide glue granules. What preparation do I need to do on the loose joints to get a solid joint? I kind of assume that additional heated hide glue...
This is a great thread concerning hide glue as I need to secure a few joints of an Agfa Ansco 8x10 also. Is there a way the existing glue in the joint to re-secure the joint by heating or by...
I'm a little ahead of schedule. 8x10 coming soon.