That doesn't solve it, unfortunately. Thank you for the advice though, I was unaware of the eccentric washer.
Type: Posts; User: devb; Keyword(s):
That doesn't solve it, unfortunately. Thank you for the advice though, I was unaware of the eccentric washer.
Would that adjustment also solve the front standard having some rotational play when the levers are pinched? I get unintended swing in my photos if I'm not very careful when pulling the standard out...
You can get dual valves so you can supply the toilet and an accessory at the same time. For example:
...
A local doctor was upgrading to digital and couldn't find anyone to dispose of the old stuff, so I loaded it all into my car. Dropped the chemicals off at the hazmat facility, kept the film. 150...
Something called M Plus - Half Blue. Shot at 100, dev HC-110 h for 6 minutes. 10 stop ND filter. Used reciprocity times for Delta 100 as an experiment, which has failed at night but worked great...
Thank you!
Could I please get the date for Master Tech # 6455127?
Good to know. Thank you!
It's actually a Linhof Symmar from 1960 or so. Would that still work?
Ah, that makes sense. I'll try it out and see what I get. Thank you!
Yes, which is how I calculated a different f-stop for each focal length even though the aperture diameter was the same. N = f/D
I'm curious about this too. I have the same shutter with the same markings, with matching 210/6.8 lens cells. BUT, I sometimes stick my orphaned Symmar 150/5.6 cells in the shutter.
I had been...
What is your development time for HC-110B with this? I've found I have to stick to the low end of the recommended range.
I have a Chamonix 045n-2 and use a Caltar 75mm f/6.8 on a flat board. I get full movement out of the universal bellows, but I need to check carefully at full shift to make sure a stray pleat isn't...
Guess I should have remembered that site. Thank you!
Did you happen to save a copy of that file? The link is now 404 and I can't find another copy anywhere.
The dark triangle in the corners is from the film getting pinched by the funnel lid in the 2-reel Paterson tank. It happened with every single sheet I did before I switched to the 3-reel tank. I feel...
Hello, could you please look up a Tech IV with serial #70572? Thank you!
Randy, you might want to consider making your own coil out of soft copper tubing like this:
...
I put a serious gouge in my Swatch walking past a nail sticking out of a wall. 1500 grit sandpaper followed up with a toothpaste polish and it looks brand new again. Of course a friend with a similar...
Super glue outgasses, which may interfere with processing chemicals. I've managed to fix a few PVC / ABS plastic pieces by using a cheap soldering iron as a welding stick.
When I had that happen a few years ago, I found pinhole light leaks in the tape that acts as the flap hinge. I replaced the tape with black gaffer tape (the real stuff that costs $20 a roll) and it...
I forget where I found these corrected times. These were advertised for Arista EDU 200, which I successfully used despite the fact that the film in the 200 box was actually Arista EDU 100. I'm almost...
Could the other variables include environmental factors like the spectral qualities of the light being captured?
What about the material from a film changing bag?
It always shows up as a dark line for me on my V700 when viewed as inverted (positive).
I got the tank for free from some guy in NYC and don't know where the tank came from. It's one shot developer and I wear gloves, so it's no big deal. Thank you though.
I only use the Combiplan for developing x-ray film because it tends to leak from where the lid meets the tank. I haven't found a solution for this yet.
I've been very happy with a Manfrotto geared head:
...
Sandy Hook, NJ. Overcast. Half speed blue, rated at 125. HC-110 B for 7 minutes.
164425
For fun, comparison to FP4+ at 100% 2400 dpi V700 scan:
164426
We welcome and encourage you to take photos of Green-Wood. If you are posting them on Instagram, tag us with the hashtag #greenwoodcemetery or post to our Facebook page, The Green-Wood Cemetery,...
Don't forget that there's another eclipse in the continental US on April 8, 2024, if you happen to screw anything up.
I always thought the male/female designation for fittings was a bit crude, but those are actually called sex bolts? I had no idea!
Without a picture of the screw I can only speculate, but it's probably a type of machine screw. I was able to match a screw from a 60 year old Graflex back at Fastenal a few years ago. Their online...
Technical deficiencies aside, it's still a good introduction to the adjustments available in Epson Scan and some things to pay attention to. With any luck OP won't just follow the directions exactly...
Thanks... I was running from my car to get the sun just before it went below the mountains to the west and I missed it. I decided to take a shot anyway and was happy with what came out.
CAGX 1134, outskirts of Denver. Chamonix 045n-2, Caltar 75mm, Portra 400.
https://c1.staticflickr.com/9/8816/29436705784_decf0e65cb_c.jpg
64th Ave by Doug Ensel, on Flickr
I still recommend Alex Burke's tutorial to the OP as they have stated that they are new to C-41 and maybe aren't ready to be concerned with "a non color managed gamma 1.8 choice" and presumably don't...
I like Alex Burke's guide to scanning negatives on an Epson V700:
http://www.alexburkephoto.com/blog/2013/06/02/scanning-and-editing-color-negative-film
Thank you (if you are indeed referring to my post). I used a 75mm Caltar II-N 6.8 MC, with Ilford FP4 and a B+W 10 stop ND filter.