As I am now, been working in a job shop that makes Military and Aerospace parts, the biggest culprit I see is Toluene. But we also use lots of Acetone, I personally spray various forms of Epoxy...
Type: Posts; User: Greg Blank; Keyword(s):
As I am now, been working in a job shop that makes Military and Aerospace parts, the biggest culprit I see is Toluene. But we also use lots of Acetone, I personally spray various forms of Epoxy...
The position of the fuses is because all CPP machines were made as such, they weren't designed to be taken apart by users. I am sorry that seems inconvenient, but the complexity of the circuitry...
Sandy; Do you know of a good source for drum scanning equipment at this point? Even if the stuff is older yet well supported is good 🖖 & Thanks! Pm is great.
As someone that was repairing Jobo processors prior to the restructuring of Jobo's business I'd say buy a new CPP3 if you can afford it and if someone actually supports them. Otherwise I would...
I think there is a partial fallacy in how some scan and interpret the requirements for output. For that matter not everyone outputs to the same standard. There is also in my experience a nose in the...
I worked on LPL Enlargers for about 6 years while Omega distributed them as Omega LPL enlargers. I want to say that the Modules are compatible however the power supplies were at some point modified...
Replace the florescent lights with Led's. Only show people the view from the vantage point of photo one ;) Put the Enlargers on a dedicated counter or custom built table.
I've seen a few darkroom sinks have a Redwood grid that lifts up stuff put inside to allow draining. Any thoughts why Redwood should be used versus say plastic used for the same reason?
I've a good...
With a Condenser Lamp house no stabilized power is required, so you actually can pull the stabilizer off the back of power supply. The six pin plug provides 22.5 v At one point I made a diagram for...
No. You plug the enlarger lamphouse into the stabilizer, the 6 pins are for a Chromega Dichroic Lamphouse stabilized to 22.5 Volts. Omega makes a short cord for use of Condenser lamp houses. That is...
Yes sir it does.
I worked for Omega for ten years, I was always doing this sort of research. In short you need the focal distance of said lens between the rear element of the lens regardless of focal length and the...
Thank you, this is what I was looking for in terms of help.
These are all great ideas and helpful, I found that the card stock I have produces an acceptable result for text, therefore I'll be printing the message portion of my cards on the card stock then...
Greetings!
So I've been away from this group for sometime. This is one group with a wide enough foot print to find an Expert! Every year I do a bit of print on demand birthday and holiday cards....
Actually, the suggestion from Jobo for use with drums (especially Expert drums) and color chemistry is to preheat the drum in the bath, with the drum rotating. I would add that you should monitor...
The idea is not just to monitor the chemistry in a beaker when color processing, if the temperature in the lower bath is correct the upper trough temp at the drum can be a good amount higher, enough...
Adjacent to Brian's statement, if you are checking the temperature be aware that Jobo CPP-2 were or should be calibrated where the temperature comes out of the outlet in the trough. That temp will be...
We stayed in Beatty at the Atomic Inn, also ate in the 3? places :) there to eat. I also tried Sierra Nevada pale ale for the second time - it is a much different ale when purchased close to the...
I went to Death Valley this past September, I FedEx'd my 4x5 gear to a NV FedEx location. We then drove from Nevada to Death Valley. Upon opening my camera at the hotel that first day I found my...
Most folks in the USA have heard of Calumet, I will miss thier presence in the photoworld- only because less competion out there equals less choice. But there are still other stores I have liked...
How much do you want for the print? I have pretty certain demographics that say cheap framing equals people that won't buy the image. If you are going to glaze a larger image you need to use plexi, I...
Quite a few years back, I had a darkroom in my parent's house, we always had a well that produced enough water to bath and drink but we were conservative. At my first home it was under 15 gallons per...
You know I've been doing photo since I was eighteen, and LF since my twenties. This year I turned 50 and one likes to think you know a lot after so much time, I gotta say this is one of the most...
I suppose that will work, I think either way its a long exposure on the paper. Knowing what grade the paper is capable of and what CI the negative has, are two benefits.
Old Chromega heads ended at 150CC, Newer ones ended at 170cc. Typically you would need to add more Magenta to get to get a grade five. The only way to know if you can get a grade five is to print a...
Hi Søren;
Where do they stick then? & are you using bi-direction rotational cycles?
Tru Vue Ar is good stuff, one side produces the best result it has a very slight texture on the out side, the glass also has a slight red bias which makes it more color pleasant than standard window...
It will be fine until that causes it to stop running.
I think you are correctly stating this, Like any other business you have to pay attention. In weddings and portraiture you can make the most money. But you have to be a people person, you have to be...
It seems like a lot but not all photographers sort of lag behind making the kind of money they should, would or could like to make. When I see some art and what it does sell for I scratch my head,...
I am going to trepidly step back into this discussion, and add something else to consider- hopefully my words will be read carefully before I am jumped all over: Would you sell your prints at...
I've been considering a small Nitrogen burst system, I envision building (Tig welding) the tanks and plumbing the system, my previous experience at the old Omega Arkay, taught me it should not be so...
Well always refrigerated RA paper could still be good, testing it is really the only way to know. If you have a control negative and a densitometer you can easily know how far off it may be. When I...
I think this forum is a valuable resource. Sometimes one (Like me) forgets that it is provided at N/C at others expense. I am as guilty of occassional forgetting this-as I surmise are others- for...
100 percent accurate.
I base my one off price on what an edition has the potentional to make me. Typically I sell 16x20 prints for a meer 100 dollars each- If some one wants to buy out the whole edition of a negative then...
This is just plain crap.
If his name is recognized. Most places like cash- no BS required.
That is my point- which you missed. Same price regardless.