Results 1 to 9 of 9

Thread: Rodenstock XPort screw and threading where to buy

  1. #1

    Join Date
    Jan 2017
    Posts
    95

    Rodenstock XPort screw and threading where to buy

    I tripped over my sync chord and the threading and screw flew off my 150 S. It must not have been on too tight as it didn't break anything on the lens. I found one screw. The other screw and threading flew off and possibly down an air conditioner vent as I can't find it.

    Does anyone know of a place that sells this part? I couldn't find anything on eBay but may have been using the wrong key words. The port still works as I took the same piece off my Schneider and the flash pops.

  2. #2

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    Re: Rodenstock XPort screw and threading where to buy

    Camera repair shop.

  3. #3

    Join Date
    Jan 2017
    Posts
    95

    Re: Rodenstock XPort screw and threading where to buy

    Yeah. I called two in the D.C. Area and they had no idea what I was talking about.

  4. #4

    Join Date
    Feb 2012
    Posts
    68

    Re: Rodenstock XPort screw and threading where to buy

    I got that very part from https://www.criscam.com/

  5. #5

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    Re: Rodenstock XPort screw and threading where to buy

    Quote Originally Posted by 1erCru View Post
    Yeah. I called two in the D.C. Area and they had no idea what I was talking about.
    Probably because you are not describing it very well.
    You need a synch post screw for a Copal 0 Shutter.

  6. #6

    Join Date
    Jan 2017
    Posts
    95

    Re: Rodenstock XPort screw and threading where to buy

    Well I found the sync post but the screws are still MIA. Does anyone know the size of the screws that would fit the threading on this lens?

  7. #7

    Join Date
    May 2016
    Posts
    744

    Re: Rodenstock XPort screw and threading where to buy

    Quote Originally Posted by 1erCru View Post
    Well I found the sync post but the screws are still MIA. Does anyone know the size of the screws that would fit the threading on this lens?
    ?? What am I missing? Didn't you say you found one of the screws? Are they both different in their size? Why not just measure the found screw or the thread they screw into?

  8. #8

    Join Date
    Jan 2017
    Posts
    95

    Re: Rodenstock XPort screw and threading where to buy

    I'm just trying to get the make and model of a screw before the vultures land.

  9. #9

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    Re: Rodenstock XPort screw and threading where to buy

    Quote Originally Posted by 1erCru View Post
    I'm just trying to get the make and model of a screw before the vultures land.
    Make and model are meaningless. Call a camera repair shop and just order what I told you to earlier. This is not rocket science and there is no need to make it so.

    What you should be worrying about is why the post came loose. This is extremely unusual. So did you perhaps strip the threads on the screw hole in the shutter?

Similar Threads

  1. Custom machining/threading
    By John Schneider in forum LF DIY (Do It Yourself)
    Replies: 10
    Last Post: 6-Nov-2014, 12:55
  2. Why won't a 86mm filter will not screw into my Rodenstock Sironar-N?
    By AtlantaTerry in forum Lenses & Lens Accessories
    Replies: 5
    Last Post: 22-Oct-2013, 03:58
  3. Threading Stainless Steel Shafts
    By Curt in forum LF DIY (Do It Yourself)
    Replies: 74
    Last Post: 14-Apr-2013, 09:24
  4. Threading a lens board hole...who does that?? :p
    By Mark Carstens in forum Cameras & Camera Accessories
    Replies: 22
    Last Post: 13-Jun-2010, 21:32
  5. So What's up with the non-threading?
    By Jim Rice in forum Feedback
    Replies: 4
    Last Post: 21-Apr-2005, 11:03

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •