I am waiting for the latest FLM sticks
and a second 100mm 1/2 ball, I use it direct to camera with the QR many here are using
IF I need to shoot birds high in trees I can add the SINAR Tilt thing
I am waiting for the latest FLM sticks
and a second 100mm 1/2 ball, I use it direct to camera with the QR many here are using
IF I need to shoot birds high in trees I can add the SINAR Tilt thing
Tin Can
Excellent points. The larger picture is more important than the details... too often (especially with view/tech cameras) the new trend is to say portable, small and light. But when its all added up, the weight and size gets up there....and its not quite so easily ported as one might think. Been trying a small wooden view camera with a digital back, to see if it is "good enough" as the view camera is flexible, takes a wide range of small sized lenses and is quick at hand.
my current favourite, except i have the original version from 1961 with a larger top plate and longer handle.
https://www.bhphotovideo.com/c/produ..._Head_for.html
My heaviest support is made of forged bronze, has true micrometer adjustments every key direction, and is far far more solid and more precise than any kind of camera head. Of course, it's for my lab only, and is the lower end control of my massive 8x10 additive enlarger. I got it military surplus free, though something like that would probably cost 15 or 20K to custom make today. But is it outdoor worthy? You betcha! It was designed to take the shock of giant battleship artillery guns as a precision sight mount. What does it weigh? I didn't even bother to weigh it; but perhaps 20 lbs by itself.
For the 4x5 Graphic View2 and the 5x7 Speeder I use a Tilt-all with it's built in 3 way pan head. No issues so far.
With the 8x10 I usually leave the head at home.
"I would feel more optimistic about a bright future for man if he spent less time proving that he can outwit Nature and more time tasting her sweetness and respecting her seniority"---EB White
I have an early Slik Master 67 which is likely more a prototype. It has this same head, and and probably the same handle yours does. A few years back, I modified the tripod by adapting a Bogen/Manfrotto spike tip kit, and then removed the head, fitted a Bogen head mounting plate to the shaft, and I can use all types of heads on it.
Best,
Dennis
I have a 35-year-old Gitzo tripod with a Gitzo three-way head. The whole setup weighs around 9 pounds and holds a "ton". The Gitzo quick release broke recently so I replaced it with a Kessler Crane QR.
I use this tripod setup for both a Mamiya RB67 and my new Chamonix 4x5, neither which require a 90 degree turn for portrait mode although the head does provide it if you need it. You can get a really heavy duty old three way pretty cheap today, second hand.
Flickr Home Page: https://www.flickr.com/photos/alanklein2000/albums
Bookmarks