Cleanly adding an PC-sync terminal to a lens board

[Mattk]

I have seen a lens board or two with a clean/flush mounted PC sync terminal and would like to do the same. I have a Packard that I currently use in front of the lens with a hacked up old pc cord. I would like to move the packard to the back of a 6x6 board and have a clean little pc connection on the face of the lens board. Does anyone know of a supplier who will provide just the terminal (thinking similar to a push to reset circuit breaker flush install)?

[C. D. Keth]

I searched high and low and can't find one at any of the places I usually find electronic stuff. Maybe call one of the strobe companies, or a camera repairman in your area.

[domaz]

How about ripping the PC terminal off something like this (Hot shoe adapter with PC terminal).

[Mattk]

domaz,

Ive thought about it but I need the scavenged terminal mount from behind. I could hack something up, but many of the terminals are ultrasonically welded in to a plastic housing--that would be a mess.

[Daniel Stone]

Mattk,

try giving these guys a holler. They might know how/where to source what you're looking for. They might even have it:

http://www.flashzebra.com/

cheers,

Dan

[Mattk]

Just found some new old stock nikon body pc terminals--fits the bill perfectly! Thanks for the input guys.

[erie patsellis]

Matt, after you've bought your stash, care to share your source?

[ic-racer]

You could try this: http://www.procamerarepair.com/NIKON...RT_p_4108.html

[Mattk]

ic-racer
Thats exactly what I plan on doing. I think its the same part--different source. Not sure if that on comes with a lead soldered to the back or if its a contact connection--I found a few with the a pigtail off the back already.

[Ari]

B&H also sells them:
http://www.bhphotovideo.com/c/produc...st_Socket.html