Results 1 to 4 of 4

Thread: Which filter factor to use

  1. #1

    Which filter factor to use

    I am confused about which filter factor to use. Should I use the filter manufacturers data or in the case of Kodak Plus X black & white film, Kodaks published filter factor data using wratten filters. It seems Kodaks filter factors are much greater than the manufacturers; in this case Hoya.

  2. #2

    Join Date
    Dec 1999
    Posts
    1,905

    Which filter factor to use

    I never use the mfg's suggested filter factor. To begin with I meter through the filter. Then in the case of a dark yellow and light to med orange (#15, 16, and 21) I add one additional stop of exposure. In the case of red (#'s 25 and 29) I add two stops.

    These figures were tested and developed before T-Max was available and may or may not work for the T grain films.

    You should really test on your own to critically determine your own working practices.

    steve simmons

  3. #3
    Moderator Ralph Barker's Avatar
    Join Date
    Sep 1998
    Location
    Rio Rancho, NM
    Posts
    5,034

    Which filter factor to use

    The filter factors provided by manufacturers are intended to be an approximation - essentially, a starting point for your own testing. You may get some variation between films due to differences in the spectral response curve of the particular film. But, it's always a good idea to do your own testing, so you gain a better understanding of the filter's effect with your film and processing technique.

    Note, too, that there are a couple of different methods for describing the filter factor - one as a multiplier (e.g. 2x, 3x, etc.) that needs to be translated into f-stops (2x = 1 stop, 4x = 2 stops), and the other as log factor (e.g. .3, .6, .9, etc.) that requires similar translation.

  4. #4

    Which filter factor to use

    for FP4: #8: 2/3 stop, #12: 1 stop

Similar Threads

  1. A "Definitive" filter factor guide?
    By matthew blais in forum Style & Technique
    Replies: 2
    Last Post: 18-Jun-2005, 11:48
  2. Exposure factor of B&W PL?
    By MAX_1650 in forum Lenses & Lens Accessories
    Replies: 5
    Last Post: 6-Mar-2001, 21:36
  3. Bellows factor question
    By Rich Lingg in forum Gear
    Replies: 5
    Last Post: 24-May-2000, 21:26
  4. Does LF handle as much enlargement factor as we all think?
    By Bill Glickman in forum Style & Technique
    Replies: 11
    Last Post: 8-Feb-2000, 19:54
  5. Formula for bellows factor
    By Bryan Fleishman in forum Style & Technique
    Replies: 3
    Last Post: 8-Jan-1999, 15:12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •