Jobo User Manual

[Jim Andrada]

If there is such a thing any idea where I could find it?

A few years ago I bought a complete set of processor and drums - got a lot of different size drums including one humongous on that claims to be for 6 x 8 x 10's - also an expert drum and on and on.

Shortly after getting it I packed up and moved to Tucson and it's been sitting in storage for 6 years - finally dragged it out and want to start using it. I think it's a CPP2/CPPA and it has a lift/ temperature control/pump etc

I don't think i t's rocket science to use it but a quick intro would be helpful - particularly something showing how to set temperature. There are three dials under a display window but not sure what their function is.

[Oren Grad]

The dials are for setting the temperature. More here:

http://www.jobo.com/web/jobo_service...2_cpp-2_00.htm

[Jim Andrada]

Thanks much - read through it and it seems clear enough. I think I'll need to freeze a couple of bottles and put them in the unused spots as our "cold" water is still well above 20C as is the air temperature.

Some of the tubes are actually two tubes joined together - Am I correct in assuming that I can separate them if I only have a couple of sheets to do and just use "half"

Also - is there any trick to inserting the film in the tanks other than just getting it under a couple of the protrusions?

[koh303]

Some of the tubes are actually two tubes joined together - Am I correct in assuming that I can separate them if I only have a couple of sheets to do and just use "half"

- Yes, you can do just that.

Also - is there any trick to inserting the film in the tanks other than just getting it under a couple of the protrusions?

No trick, just slide them along the ridges