Results 1 to 3 of 3

Thread: Sinar Bellow Question

  1. #1

    Join Date
    Nov 2004
    Location
    Coram, Montana
    Posts
    93

    Sinar Bellow Question

    Is the bellows for a P Sinar the same as P2? I enjoy "saving" older cameras by rebuilding them and a new bellows is necessary in the majority of cases. Thank you in advance.

  2. #2
    8x10, 5x7, 4x5, et al Leigh's Avatar
    Join Date
    Dec 2010
    Location
    Maryland, USA
    Posts
    5,438

    Re: Sinar Bellow Question

    The F/C/X/P bellows are the same with the exception of the 8x10 metering back (standard on the P2).
    It's larger than the 8x10 non-metering back, and requires a different bellows.

    The 4x5 and 5x7 bellows are all interchangeable.

    - Leigh
    If you believe you can, or you believe you can't... you're right.

  3. #3

    Join Date
    Nov 2004
    Location
    Coram, Montana
    Posts
    93

    Re: Sinar Bellow Question

    Thanks Leigh
    My question was poorly worded. It was between the P 8x10 and the P2 8x10. You caught that and cleared it up. Thanks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •