Graflex SLR Repair Site Recommendations

[ViewCameraNut]

I have an Graflex Home Portrait 5x7 Camera that needs shutter service. The cloth is good, but the shutter does not fire at all times (sticks). Could anyone recommend a good repair shop for this type of camera? Thanks in advance. Sincerely, Mike C.

My Galleries: www.pbase.com/jakeyferret

[EdWorkman]

Have you tried a little light oil and firing it several times? On the pre-anniv Speed there is an exterior hole in the journal of the roller- dunno about your graflex, but that got my Speed, er, up to speed.

[Jim Noel]

Fire it several times at the top tension, and smallest slit, then the next tension down, etc. This may loosen it up considerably.

[EdWorkman]

Check the graflex.org site
They don't permit advertising, but you can get info and a contact for further help

[ViewCameraNut]

Thanks to all the replies so far, they have been helpful. Sincerely, Mike C.

[jnantz]

mike

contact bert saunders on the graflex board
he works/worked on slr's and their shutters.
he has helped me over the years, i am sure he
will be able to help you.

[ViewCameraNut]

Thanks again for all the replies. They led me to Frank Marshman in VA. who was also recommended by S.K. Grimes. Spoke with him today and he can repair it. Will post again with the quality of the work and price when I get the camera back in case anyone needs work done on their Graflex. All the best, Mike C.

[Sirius Glass]

mike

contact bert saunders on the graflex board
he works/worked on slr's and their shutters.
he has helped me over the years, i am sure he
will be able to help you.

Bert Saunders email address bsaunders1@bak.rr.com

[ViewCameraNut]

Hello everyone, I found someone not far (Virginia) from me who was recommended by S.K. Grimes. I just got the camera back and it works like new again! The turn around was quick and he is a great guy to speak with as well. Price was reasonable too. I hope the moderators don't mind me giving the guy a plug, his name is Frank Marshman of Camera Wiz. If you need his number shoot me an pm. Sincerely, Mike C.

PS: I spoke with Bert and he no longer works on cameras, but was more than willing to send me an repair manual by email (didn't dare to try it myself).