Does anyone know what the front filter thread size is on this lens?
Also, would you know if lens will fit a Tachihara F series?
Thanks in advance, Ken
Does anyone know what the front filter thread size is on this lens?
Also, would you know if lens will fit a Tachihara F series?
Thanks in advance, Ken
Read this. Filter size is M 40.5 X 0.5
Since the pitch isn't a standard 0.75 camera pitch you are probably out of luck but those with more machining knowledge than I might correct me on that.
I have a Schneider Symmar 135 f:5.6 and it uses the same size filter. They are readily available from B&H and are 40.5x0.5 and fit perfectly. I have several and it is the only size that I carry aside from my 67mm filters that I have standardized for most of my lenses.
Heliopan!
"I believe there is nothing more disturbing than a sharp image of a fuzzy concept!" (Ansel Adams)
https://philippe.grunchec-photographe.over-blog.com/
Since nobody else got this one, the lensboard pictured is a Sinar, which won't fit a Tachihara. Tachihara's use the Linhof Technika-sized board, but centered (which is less common than off-centered).
These will fit your Tachi: https://www.badgergraphic.com/store/..._detail&p=1080
You'll have to remove the lens from the Sinar board and re-attach it to the Tachi board, for which you may want a lens wrench too.
https://www.flickr.com/photos/drew_saunders/
Hey I just wanted to "thank you" you guys for the help and insights regarding my question. You've been very helpful which makes this forum such a great place.
blessings,
Ken
Bookmarks