Results 1 to 3 of 3

Thread: 10x8 & 5x7 in Jobo CPE2+

  1. #1

    Join Date
    Jul 2008
    Location
    London
    Posts
    94

    10x8 & 5x7 in Jobo CPE2+

    Hi

    I would like to process 10x8 and also so 5x7 B/W C41 and E6 in a CPE2+
    It would seem that the Expert drum will not fit so what should I use

    Regards

    Robin

  2. #2

    Join Date
    Jul 2008
    Location
    Hong Kong
    Posts
    109

    Re: 10x8 & 5x7 in Jobo CPE2+

    My experience so far is :

    I did E6 8x10 2 at a time (without lift as well). Failure rate is about 4 out of 16. I suspect one need to use recommended volume (not too much and not too low) and also ensure that the hole is plug (as you are not using the central rod; plug the middle hole is needed if not using the cup).

    I am still experiment with 1 for my ATL1500 after the 2 each time of my CPE+. The ATL1500 is 1 at a time and still so far 50% already.

    But I did got a Duolab as well as an expert drum (with Cibachromic roller). Would see whether it is better.

  3. #3

    Join Date
    Apr 2010
    Posts
    3

    Re: 10x8 & 5x7 in Jobo CPE2+

    Quote Originally Posted by brighamr View Post
    Hi

    I would like to process 10x8 and also so 5x7 B/W C41 and E6 in a CPE2+
    It would seem that the Expert drum will not fit so what should I use

    Regards

    Robin
    Expert-Drums fits on CPP-2, and the ATL's (except ATL1500)

    kind regards
    Hermann

Similar Threads

  1. differences betwen 4x5 5x7 and 8x10 when you shoot
    By luis prado in forum Darkroom: Film, Processing & Printing
    Replies: 16
    Last Post: 12-Jun-2008, 11:52

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •