Results 1 to 4 of 4

Thread: Larger output size or higher resolution scan?

  1. #1
    Scott Hannaford
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    33

    Larger output size or higher resolution scan?

    Hi all, hopefullly a fairly easy question on scanning.
    I want to get some 24" X 30" prints done from some B&W 4x5 negs. Printing on a Lambda, the lab wants files submitted at desired size (eg 24x30), 300dpi (which sounds fair enough to me).
    Not having a lot of experience, having only used Vuescan and Silverfast a couple of times, what is the best way for me to get to the desired file size?
    Should I be looking to scan the neg at 300dpi with an output size of 24" x 30", or should I be setting output at actual size of the neg, but scanning at higher resolution? Does it matter which way I go?
    Thanks,
    Scott

  2. #2

    Join Date
    May 2009
    Posts
    535

    Re: Larger output size or higher resolution scan?

    The way to work it out is to work backwards from the print size using the longest print dimension.
    So the longest size is 30 inches. At 300 pixels per inch output, that is 30x300 = 9000 pixels. So your scanned neg needs to give 9000 pixels width. If your neg image area is 5 inches wide, then you divide the required pixels by 5 inches. So 9000 / 5 = 1800.
    So you need to scan at 1800 samples per inch to give a 9000 pixels wide scan file.

    Also be aware that actual neg image area may not be 5 inches, it may only be 12cm x 9cm which is 4.72in by 3.54 which is a 4:3 ratio. Your 30x24 print is 6:5 ratio so you will be using a crop from the full image area which means you will need to scan at higher than 1800spi. Only you know what the crop will be so you will have to work out actual numbers yourself. If you scan at the scanner native resolution, say 4800spi, then you can crop the scan to the correct aspect ratio and downsize to 9000 pixels width. Or you can measure the scan area and scan at the required resolution to give 9000 pixles width.
    If it's a drum scan, then ask for 9000x7200 output file which is what you want. The scan operator will work out the spi for you.

  3. #3
    Scott Hannaford
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    33

    Re: Larger output size or higher resolution scan?

    Thanks so much for the helpful, clear answer, that makes sense the way you've described it.
    Cheers,
    Scott

  4. #4

    Join Date
    May 2009
    Posts
    535

    Re: Larger output size or higher resolution scan?

    just noticed I said 30x24 is 6:5 ratio. It is of course 5:4 ratio but you get the idea.

Similar Threads

  1. DOF question
    By Joe_1422 in forum Style & Technique
    Replies: 11
    Last Post: 23-Jan-2012, 16:43
  2. Microtek Artixscan 2500f disassembly for cleaning?
    By Gene McCluney in forum Digital Hardware
    Replies: 26
    Last Post: 15-Oct-2009, 14:08
  3. Drum Scan 4X5 to 200 MB or 300 MB?
    By John Hollenberg in forum Digital Hardware
    Replies: 8
    Last Post: 25-Dec-2004, 11:08
  4. Resolution limits of prints
    By paulr in forum Digital Hardware
    Replies: 18
    Last Post: 27-Sep-2004, 11:20
  5. Diffraction and Lens Flare
    By Paul Mongillo in forum Lenses & Lens Accessories
    Replies: 10
    Last Post: 12-Mar-2000, 13:57

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •